speakers, 92 mazda 929

Home / the12volt's Install Bay / Car Audio / speakers, 92 mazda 929 (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

rock1

Copper - Posts: 120

Joined: April 06, 2005

Posted: May 17, 2006 at 4:15 PM / IP Logged

The factory speakers have a harness that connects to the speakers . but when trying to install aftermarket speakers there is no place to install this harness to the speakers .Do I need to get some adapter to connect the speakers?

mustangfoo

Silver - Posts: 371

Joined: November 16, 2005

Location: United States

Posted: May 17, 2006 at 4:39 PM / IP Logged

could cut them or tap into them

rock1

Copper - Posts: 120

Joined: April 06, 2005

Posted: May 17, 2006 at 4:41 PM / IP Logged

what color do I tap into?

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: May 17, 2006 at 4:52 PM / IP Logged

There are speaker adapters for most manufacturers sold by places like Crutchfield.

Support the12volt.com

tcss

Silver - Posts: 1,623

Joined: June 07, 2004

Location: United States

Posted: May 17, 2006 at 4:53 PM / IP Logged

What is the make and model of your car?

There is no such thing as free installation!

mustangfoo

Silver - Posts: 371

Joined: November 16, 2005

Location: United States

Posted: May 17, 2006 at 4:57 PM / IP Logged

need some more info, make model year so I can look up the color codes, but you would tap into both wires, but we need to find out which is + and which is -.

rock1

Copper - Posts: 120

Joined: April 06, 2005

Posted: May 17, 2006 at 4:59 PM / IP Logged

this is a 92 mazda 929

tcss

Silver - Posts: 1,623

Joined: June 07, 2004

Location: United States

Posted: May 17, 2006 at 5:02 PM / IP Logged

Go to general info on the left side of this page and click on vehicle wiring, it's in there.

There is no such thing as free installation!

rock1

Copper - Posts: 120

Joined: April 06, 2005

Posted: May 17, 2006 at 5:11 PM / IP Logged

The aftermarket has only two slide in connectors so how would I connect it to the main harness

tcss

Silver - Posts: 1,623

Joined: June 07, 2004

Location: United States

Posted: May 17, 2006 at 5:24 PM / IP Logged

Clip them off and crimp on .125 and .250 female spade connectors.

There is no such thing as free installation!

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.