DEI 551t

Home / the12volt's Install Bay / Car Security and Convenience / DEI 551t (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

neo02_gs

Member - Posts: 2

Joined: November 13, 2002

Location: United States

Posted: January 08, 2003 at 6:32 AM / IP Logged

Can a DEI 551t add on remote start be added to a car with just keyless entry?

I want to install it on my wifes 2001 Grand Am GT.

Thanks in advance.

Greg

Ohmz

Copper - Posts: 193

Joined: May 09, 2002

Location: United States

Posted: January 08, 2003 at 1:18 PM / IP Logged

What kind of keyless entry do you have? If it has an auxilury output on the remote you can do it very easily. This vehicle has a Passlock II system, so you will have to purchase the bypass for this install.

My Personal Installer Note: Connectors are easy, neat, and professional. But do you know how to crimp properly?

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: January 08, 2003 at 4:49 PM / IP Logged

If you have an aftermarket keyless entry system then you can just use a spare -outpout to activate it. But if you have a factory keyless entry system you probably shouldn't. Sure it can be done but it probably wouldn't be reliable.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

neo02_gs

Member - Posts: 2

Joined: November 13, 2002

Location: United States

Posted: January 09, 2003 at 7:16 AM / IP Logged

[Originally posted by Ohmz-]What kind of keyless entry do you have? If it has an auxilury output on the remote you can do it very easily. This vehicle has a Passlock II system, so you will have to purchase the bypass for this install.

It has Factory Keyless entry. I knew about the passlock just not sure about the aux output.

Originally posted by auex-If you have an aftermarket keyless entry system then you can just use a spare -outpout to activate it. But if you have a factory keyless entry system you probably shouldn't. Sure it can be done but it probably wouldn't be reliable.

Thanks I was looking for info on reliability.

I appreciate the responses, a full aftermarket remote start (not add on) is what I am going to go with.

Thanks again

Greg

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

DEI 551t

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.