alarm? echo 2000 Hatc

Toyota 2000 Hatch back RHD. Could some one help me locate the wires and how to reach them for: 1. Current Drop sensing wire (+12V). The installation guide recommends i connect it to the DOME light +12V... don't know where to find that wire. 2. Left and Right indicator light flasher (have 2 wires, 1 to left, and 1 to right) 3. Door ajar. 1 white wire to connect. have to be negative switching door (not exactly sure what it means) 4. Ignition switched lead which does not fall to 0 voil when engine is cranked 5. Positive feed wire to the started solenoid

1st of all thanks for the reply. i have checked out the wires.. i got the ignition and the 12v power... BUT. 1. can't find the RED / white door wire. There are 2 RED / white wires but both of them have silver dashes on it. i.e. RED / WHITE/ silver dash.. and the other one is RED / WHITE/ double silver dash. 2. the GREEN/ black and GREEN/ YELLOW wires are very thick and i was wondering if this is the right wire for the left/right indicators. the instruction for installing the alarm was to connect 2 orange wires to the indicator circuits, is the GREEN/ black, GREEN/ YELLOW wires the right place to splice into?

The single banded wire is the door (-) wire, yes they should be the wires your looking for but test them to be sure.WOW Sight and Sound

Maroochydore

Nothing is impossible!

Do it right the first time or don't do it at all.