Lost transmitter to alarm

Home / the12volt's Install Bay / Car Security and Convenience / Lost transmitter to alarm (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

danielleinlv

Member - Posts: 1

Joined: May 29, 2006

Location: United States

Posted: May 29, 2006 at 7:43 PM / IP Logged

I have a crimestopper CS-2000 Alarm and I lost the transmitter and the alarm is on and i cant start my car, I tried to do an emergency disarm but no luck it just keeps going off. Is there any way I could unplug it so i can disable the starter kill relay . I have a 93 thunderbird if that helps . thank you

Back to Top

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: May 30, 2006 at 7:44 AM / IP Logged

Usually Ignition ON, Press & Hold Valet Button, approx 3 seconds will Dis-arm.

Otherwise, just unplugging Alarm may NOT let Vehicle Start, if it has Starter Kill / Ignition Kill.

You will have to find the wires for that to re-wire

MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Back to Top

spookiestylez

Silver - Posts: 531

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 23, 2005

Location: Virginia, United States

Posted: May 30, 2006 at 9:42 AM / IP Logged

If disarming the alarm dosent work, just unplug it and reconnect the factory starter wire ( RED / Lt.Blue) Then I would look into getting a replacment remote. GL

sS

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Lost transmitter to alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.