my first project pictures

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / my first project pictures (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

Melted Fabric

Silver - Posts: 509

Joined: October 24, 2003

Location: California, United States

Posted: July 14, 2006 at 2:05 PM / IP Logged

Sandungero24 wrote:

my first project pictures - Page 4 -- posted image.

Beautiful photo, that an SR20DET Red top?

I have not failed. I've just found 10,000 ways that won't work.

When you do not know what you are doing and what you are doing is the best -- that is inspiration.

Back to Top

Sandungero24

Member - Posts: 44

Joined: February 24, 2004

Location: United States

Posted: July 14, 2006 at 11:28 PM / IP Logged

no that's a ka24de i did the paint job.

my first project pictures - Page 4 -- posted image.

Back to Top

th3c3z

Member - Posts: 7

Joined: July 12, 2006

Location: United States

Posted: July 15, 2006 at 12:29 AM / IP Logged

howd you paint it?

Back to Top

Sandungero24

Member - Posts: 44

Joined: February 24, 2004

Location: United States

Posted: July 15, 2006 at 11:21 AM / IP Logged

th3c3z first is better if you now a little mechanic because u got to take everthing a part. we replace a lot of part like timing belt, water pump, ect. and we use spray can special for heat. for the valve cover we use regular paint and the letters i did it by hand with white paint.

my first project pictures - Page 4 -- posted image.

Back to Top

srsoupy

Member - Posts: 9

Joined: April 22, 2006

Location: Suriname

Posted: July 16, 2006 at 11:30 AM / IP Logged

this is so clean good lookin

soupy

Back to Top

Melted Fabric

Silver - Posts: 509

Joined: October 24, 2003

Location: California, United States

Posted: July 17, 2006 at 12:09 PM / IP Logged

Very nice, you have it looking like a brand new crate motor man.

I have not failed. I've just found 10,000 ways that won't work.

When you do not know what you are doing and what you are doing is the best -- that is inspiration.

Back to Top

slayer1011

Member - Posts: 5

Joined: September 04, 2005

Location: Canada

Posted: July 18, 2006 at 8:26 PM / IP Logged

Thanks for the tip to hold it in place, also that motor looks Amazing.. like Brand new... definaly something i will be attempting when i pull mine out for the rebuild...

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

my first project pictures

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.