Adding power door locks

Home / the12volt's Install Bay / Car Security and Convenience / Adding power door locks (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

ozzie2020

Member - Posts: 5

Joined: October 15, 2002

Location: United States

Posted: June 14, 2006 at 11:35 PM / IP Logged

I am working on a 2006 F-150 the out put of the aftermarket keyless entry are postive. I am also adding actuators to the truck. I've tried every way posible that i know of to wire the relays inorder to get them to work. Does any one know what i need to do i order to wire them correctly or get them working???? thanks

Back to Top

jaybird2020

Member - Posts: 16

Joined: December 30, 2005

Location: United States

Posted: June 15, 2006 at 1:25 AM / IP Logged

you need two relays pin 85 goes to ground pin 86 is pos itive from alarm (lock and unlock) pin 87 goes to goes to 12volts pin 30 goes to the lock motors and 87a goes to ground hope this helps

Back to Top

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: June 15, 2006 at 8:10 AM / IP Logged

Be sure you use SPDT Relays ( Single Pole Double Throw )

MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Back to Top

djfearny2

Silver - Posts: 810

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 23, 2002

Location: United States

Posted: June 15, 2006 at 8:13 AM / IP Logged

If you look in the relay diagrams you need a reverse polarity setup both relays the same way and like posted about have to be spdt relays that means they have pins, 86,86,87,87a,30

not the ones found at some autostores with two pin 87a's or two pin 87's

Jon

Installer/Help Technician

---coral springs florida---

mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Adding power door locks

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.