factory overhead with avic-n3?

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / factory overhead with avic-n3? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

doibuy

Copper - Posts: 177

Joined: March 15, 2006

Posted: June 16, 2006 at 10:06 PM / IP Logged

Have the lady bring in her factory radio, and plug it back in if the TV doesn't turn on without it. Check to see what wires are getting power and make sure that they power up with the radio unplugged. With the TV powered up take a "computer safe" test light (I use the Snap-On one) and check the wires until you find one that causes the picture to jumble when testing. This will be your video lead. To get your audio leads grab a speaker and test the wires until you get audio.

The easier way would be if you have a contact at a dealership and they could get you a schmatic of the plug.

Back to Top

xinstallerx

Member - Posts: 7

Joined: January 05, 2006

Location: United States

Posted: June 17, 2006 at 11:37 AM / IP Logged

in the small 4-6 pin plug there is a lt GREEN/ or lt GREEN/ purple the needs 12v to turn the overhead on. You can make it really hot by integrating factory audio at the same plug for factory dvd. You can also itegrate video both ways if you pull the factory overhead down and solder into the wiring up there.

Installers will put it anywhere!

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

factory overhead with avic-n3?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.