the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Avic N2 and Ipod?


Post ReplyPost New Topic
< Prev Topic Next Topic >
Ravendarat 
Platinum - Posts: 2,806
Platinum spacespace
Joined: February 23, 2004
Location: Canada
Posted: June 18, 2006 at 3:43 PM / IP Logged  
I put in a N2 and an Ipod interface for a customer, it shows him the track number and the track time and he can change tracks but to get title displays, everytime he turns the car on he has to go through the menu system to turn it on using "function 3". Is this standard and just stupid or is there something else going on here?
double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer
Ravendarat 
Platinum - Posts: 2,806
Platinum spacespace
Joined: February 23, 2004
Location: Canada
Posted: June 18, 2006 at 9:46 PM / IP Logged  
Oh ya, and the Icon that shows up says EXT 1 not IPOD, any reason why?
double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer
securinu 
Silver - Posts: 772
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: September 15, 2002
Location: United States
Posted: June 20, 2006 at 12:41 AM / IP Logged  
is it the pioneer interface or another brand.
Joe O'Byrne
Owner / Installer
Ravendarat 
Platinum - Posts: 2,806
Platinum spacespace
Joined: February 23, 2004
Location: Canada
Posted: June 20, 2006 at 11:37 PM / IP Logged  
Its the pioneer one, ICB100 or something to that effect.
double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer
trdtim 
Member - Posts: 22
Member spacespace
Joined: February 04, 2006
Location: United States
Posted: June 21, 2006 at 12:28 AM / IP Logged  

Ravendarat wrote:
Oh ya, and the Icon that shows up says EXT 1 not IPOD, any reason why?

it is the hardware in the N2.  shows up as an external source.  no way to change it.

mrailing 
Member - Posts: 12
Member spacespace
Joined: April 28, 2002
Location: United States
Posted: June 24, 2006 at 12:54 AM / IP Logged  
Ext1 no way to change.
As far as always having to change to Function 3, sounds like the Pioneer Ipod interface isn't connected correctly. The yellow wire is a probably connected to a 12 volt switched instead of a 12 volt constant which causes the ipod interface to loose the setting every time the car is turned off....

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, December 7, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer