1995 toyota carina alarm wiring

Hi there,

I am attempting to install a Fusion f-2000 alarm in my 1995 Toyota Carina ED (S limited).

There isn't wiring info for this car in the database. It appears similar to a 95 Celica but i'm not sure how similar. Mainly the relevant wire colours/locations is what I'm after.

Thanks for any help,

Dan.

THIS IS FOR A 1993 MODEL THIS IS ALL COULD FIND SO DON'T TAKE THIS TO HEART BUT IT IS THE BEST I COULD DO (AND I AM NOT YELLING AT YOU JUST WANT YOU TO READ THIS BEFORE YOU TEAR INTO ANYTHING) 12volts                  Starter      BLACK/ white             ignition harness Second Starter                  Ignition      wht/rd or blu/red             ignition harness Notes: Fuel pump wire is blue/black in the o/s/f sill loom. Second Ignition                  Third Ignition                  Accessory      BLACK / YELLOW             ignition harness Second Accessory      pink/blue             ignition harness Keysense                  Power Lock      brn/wht or blu/red       -       entry point from door to veh Power Unlock      brn/yel or blu/blk       -       entry point from door to veh Lock Motor                  Unlock Motor                  Parking Lights+      grn/blk & grn/yel             under the steering column Parking Lights-                  Hazards                  Turn Signal(L)                  Turn Signal(R)                  Reverse Light                  Door Trigger      RED / white       -       o/s/f kick panel Dome Supervision                  Trunk/Hatch Pin                  Hood Pin                  Trunk/Hatch Release                  Power Sliding Door                  Factory Alarm Arm                  Factory Alarm Disarm                  Disarm No Unlock                  Tachometer                  Wait to start                  Brake Wire                  Parking Brake                  Horn Trigger                  Memory Seat 1                  Memory Seat 2                  Memory Seat 3                 

Thanks for that.

Ive been testing wires with my multimeter and most of them are different in my 95 model. I have most of them identified its just the central locking im working on now. If anyone does find wiring colour info for a 1995 toyota carina ED I'd be keen to see it. I suspect I'll be asking how to diode isolate my door locks soon, im pretty sure they are negative polarity.

Thanks again. Dan.