the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Fiberglass, Roush Mustang


Post ReplyPost New Topic
< Prev Topic Next Topic >
Teamrf 
Gold - Posts: 1,031
Gold spacespace
Joined: January 13, 2004
Location: United States
Posted: June 29, 2006 at 5:26 PM / IP Logged  

Good job

~The Rookie~
Rookie of the year that is...
Don't let the smoke out of your equiptment..it doesn't go back in.
memphis9 
Copper - Posts: 53
Copper spacespace
Joined: November 12, 2005
Location: United States
Posted: June 29, 2006 at 8:10 PM / IP Logged  

Have some new pictures up. I'm almost finished with the trim panels. I still have some more sanding and fitting to do so the three pannels line up. But overall I feel that its comming  along.

Fiberglass, Roush Mustang - Page 2 -- posted image.

The right trim panel is finished. All I have to do is some gap fitment and cover it.

Fiberglass, Roush Mustang - Page 2 -- posted image.

Fiberglass, Roush Mustang - Page 2 -- posted image.

the left trim panel is almost done. I still some sanding but should be done tomarrow.

Fiberglass, Roush Mustang - Page 2 -- posted image.

Fiberglass, Roush Mustang - Page 2 -- posted image.

Fiberglass, Roush Mustang - Page 2 -- posted image.

G-Boys Customz
Northville, MI
Tegpilot 
Copper - Posts: 93
Copper spacespace
Joined: July 11, 2005
Location: United States
Posted: June 29, 2006 at 9:37 PM / IP Logged  

Lookin good memphis.  Anxious to see final product.

99 INTEGRA LS 4DR Forest Green.Alpine CDA9857 Deck. JBL 755.6 AMP, Kappa 50.7cs Front, Kappa 6x9's Rear, 4 JBL GTO804 subs
memphis9 
Copper - Posts: 53
Copper spacespace
Joined: November 12, 2005
Location: United States
Posted: July 29, 2006 at 12:34 PM / IP Logged  
sorry for not updateing this in a while. Plans have changed a bit. I'm going to use two 5500 8s. There should be more pics up by the end of the day 
G-Boys Customz
Northville, MI
Aruman 
Silver - Posts: 363
Silver spacespace
Joined: July 27, 2005
Location: Aruba
Posted: July 29, 2006 at 10:31 PM / IP Logged  
Looks very nice so far, but why are you going with 5500 8"? stay with the 5500 12" or one 7500 12".
Shaking The Neighborhood
memphis9 
Copper - Posts: 53
Copper spacespace
Joined: November 12, 2005
Location: United States
Posted: August 02, 2006 at 7:23 PM / IP Logged  

new pics.

Fiberglass, Roush Mustang - Page 2 -- posted image.

the two new MTX tunder 5500 8's

Fiberglass, Roush Mustang - Page 2 -- posted image.

Fiberglass, Roush Mustang - Page 2 -- posted image.

Fiberglass, Roush Mustang - Page 2 -- posted image.

Fiberglass, Roush Mustang - Page 2 -- posted image.

Fiberglass, Roush Mustang - Page 2 -- posted image.

Fiberglass, Roush Mustang - Page 2 -- posted image.

G-Boys Customz
Northville, MI
layin low 
Member - Posts: 2
Member spacespace
Joined: August 02, 2006
Location: Cape Verde
Posted: August 04, 2006 at 1:19 PM / IP Logged  
i was just wondering y u would go with 8"s
Layin Low
auex 
Platinum - Posts: 5,041
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 23, 2002
Location: Arizona, United States
Posted: August 04, 2006 at 3:38 PM / IP Logged  
With the title I was expecting something else, hehehe.
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
memphis9 
Copper - Posts: 53
Copper spacespace
Joined: November 12, 2005
Location: United States
Posted: August 04, 2006 at 4:18 PM / IP Logged  

layin low wrote:
i was just wondering y u would go with 8"s

I went with the 8's because I,m not looking for a loud system. I building this system to look sweet at shows and to sound good. Plus I don't see to many 8 installs at shows. So I'm trying to be different too.

G-Boys Customz
Northville, MI
memphis9 
Copper - Posts: 53
Copper spacespace
Joined: November 12, 2005
Location: United States
Posted: September 25, 2006 at 9:31 PM / IP Logged  

Sorry I have not updated in a while. I go to school out of state and I can only work when I come home.

Fiberglass, Roush Mustang - Page 2 -- posted image.

Fiberglass, Roush Mustang - Page 2 -- posted image.

Above the box I'm starting to work on the pannel that holds one or two 7inch LCD screens.

Fiberglass, Roush Mustang - Page 2 -- posted image.

G-Boys Customz
Northville, MI
Page of 4

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, March 18, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer