center console

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / center console (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

dan476

Member - Posts: 31

Joined: October 30, 2004

Location: Canada

Posted: July 15, 2006 at 11:09 PM / IP Logged

hey guys i got a center console that i am wanting to re-do but i am not sure what to use for curves. should i use mdf and do a lot of sanding? or is there another option?

Here are the Pictures of the current console, if you can tell it curves out in the middle.

center console - Last Post -- posted image.

~Dan

Back to Top

mustangfoo

Silver - Posts: 371

Joined: November 16, 2005

Location: United States

Posted: July 16, 2006 at 1:30 AM / IP Logged

could make a mold of it, and go from there. Make a mold of your positve, and then with your negative you can create your piece and pop it out of the negative mold.

Back to Top

tackbradley

Member - Posts: 16

Joined: May 15, 2006

Location: United States

Posted: July 18, 2006 at 6:10 PM / IP Logged

hey mustang, can you explain a little more how to do this?im very interested!!!

~Jason

(516) Drum Co.

Back to Top

Melted Fabric

Silver - Posts: 509

Joined: October 24, 2003

Location: California, United States

Posted: July 19, 2006 at 3:27 PM / IP Logged

Dan, are you going to build off of the current one? or copy it and use that as a skeleton to make something more fancier and better looking?

I have not failed. I've just found 10,000 ways that won't work.

When you do not know what you are doing and what you are doing is the best -- that is inspiration.

Back to Top

dan476

Member - Posts: 31

Joined: October 30, 2004

Location: Canada

Posted: July 19, 2006 at 3:38 PM / IP Logged

i was leaning more towards using this as skeleton and build on in, but now that i am going to glass whole dash i think i am going to design a custom console

~Dan

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

center console

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.