12w7 Sealed Enclosure

Home / the12volt's Install Bay / Car Audio / 12w7 Sealed Enclosure (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

saturnsubohio

Copper - Posts: 114

This member has made a donation to the12volt.com. Click here for more info.

Joined: May 21, 2004

Location: United States

Posted: July 21, 2006 at 6:25 PM / IP Logged

coppellstereo wrote:

I'm really excited to get it.

12w7 owners, let me know if you think of anything else i should know!

Thanks again

i just reinstalled my ported W7, on less than 200 watts i can still get the pavement quaking if need be. The SQ response is fantastic i think (under tha params of a ported box) bass is punchy.

only thing i would say as im sure you know, is set the gain according to JL's site. and be prepared to rock the sidewalk.

My sealed box was closer to 2.5 cu Ft. it filled the width of my trunk and was about 13" deep. it was tight but didnt hit the real low notes that the JL W7 is capable of. Good Luck I'm sure you will enjoy your sub.

2006 WRX STI

Electrical Engineer

Ohio University Alumni

Back to Top

coppellstereo

Silver - Posts: 785

Joined: November 21, 2005

Location: United States

Posted: August 10, 2006 at 9:57 AM / IP Logged

Your new box is ported?

Should I go with JL's recommended enclosure volume, or try something bigger - WinISD throws out about 2.25 cuft I think

Back to Top

coppellstereo

Silver - Posts: 785

Joined: November 21, 2005

Location: United States

Posted: August 10, 2006 at 10:05 AM / IP Logged

Also, I will be using a 500/1 which will make close to the woofers 750 power handling. Would using a bigger box be of any advantage?

Back to Top

coppellstereo

Silver - Posts: 785

Joined: November 21, 2005

Location: United States

Posted: August 11, 2006 at 12:53 PM / IP Logged

anyone have any ideas?

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

12w7 Sealed Enclosure

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.