Add siren to motion detector only?

Home / the12volt's Install Bay / Car Security and Convenience / Add siren to motion detector only? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

passat 5.5

Member - Posts: 13

Joined: July 18, 2006

Location: Canada

Posted: July 30, 2006 at 7:44 AM / IP Logged

In this thread I got some excellent advise-Thank You!- for adding a motion detector to my Passat 5.5:

https://www.the12volt.com/installbay/forum_posts.asp?tid=80441&PN=1&tpn=1

I now have the 508 Double Guard installed for the inside only and tied in with the Passat alarm system (hood).

Question:

Is it possible to connect a siren so that it gets only triggered by the motion sensor, instead of, or in addition to, the car horn?

Back to Top

Big Dog

Gold - Posts: 1,265

This member consistently provides reliable information

Joined: May 02, 2002

Location: Quebec, Canada

Posted: August 08, 2006 at 11:41 AM / IP Logged

I've done it by using the output of the 504 to drive a relay to drive the siren. Interesting results! I suppose 508 will work as well.

Prepare your future. It wasn't the lack of stones that killed the stone age.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Add siren to motion detector only?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.