100watt PA/Siren speaker

Home / the12volt's Install Bay / Cellular and Communications / 100watt PA/Siren speaker (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Detour

Member - Posts: 20

Joined: September 21, 2004

Location: United States

Posted: August 07, 2006 at 8:20 PM / IP Logged

Ok, I've got 2 different boxes, one for my siren and the other for my airhorn/PA. When I connect both of them to the 100 watt speaker under the hood, it cuts down on the volume of both boxes.

I'm wondering if I can take a DPDT toggle switch and just connect the negative speaker wires off both of the boxes to the sides of the toggle. And then run another negative wire from the middle of the toggle switch to the negative wire on the external speaker....

Unless someone might have a safer way to wire this.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You can vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

100watt PA/Siren speaker

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.