multiple switch and relay setup

good catch, so just switch 87 and 87a around on the first 2 relays?

one question about the terms. that has no connections, can i just ground them out, or just leave them alone?

I'm still a few weeks away from getting the C02 system.

I have the relays on the way, while I'm waiting for the C02 system, I'm going to go on and wire everything up, and get it ran, and just label all the wiring.

will Bosch 20/30 amp relay work fine? I could have gotten the 30/40 they were just $5 more for 10! I got 10 relays for $40. shipped.

I've got more stuff I got to hook up to switches and relays, I'll just make new threads with them, and put 1 per thread. I think I got the fog lights wiring correct, the fuel cut-off I'm not sure about, amplfier cut-off switch I think its correct for what I need to do. and then the Ignition Safety and push start button, I'm lost on that!

I'll get this one finished before I do anymore threads on switches and relays.

I think I'm getting the hang of relays, but I'm just not to sure about doing them without help from someone!

Once again, thanks for replying and helping me out!!!

Just leave the empty terminals alone.  If you want you can just put an insulated female terminal (with no wire) on them so they won't touch anything.

Those relays should be fine.

ok, i'll leave them alone