civic dual angel eye projectors

Well my friend wants me to install these on his car. I know i need to add a relay to the projector beams so they get enough juice but what i really need help is with the angel eye led's. Since they are LED's i know i have to put a resistor, but i dont know how bic of a resistor i need. Does anyone know the size of the resistor i need for the LED's??? Thanks Carlos P.s. here is a link of the head lights http:///.com/ebaymotors/dll?ViewItem&rd=1,1&item=140017296391&ih=004&sspagename=STRK%3AMEWN%3AIT2015 Hyundai Genesis Ultimate Black on Black

Tinted Windows, Fogs, Roof Spoiler, ARK Springs, Ruff R1 20's Staggered

anyone know what resistance i should have them at?? 2015 Hyundai Genesis Ultimate Black on Black

Tinted Windows, Fogs, Roof Spoiler, ARK Springs, Ruff R1 20's Staggered

All you need to do is hook up the two wires for the Angel Eye portion of the lights. One goes to ground and the other goes to a (=) trigger of your choice. All the resistors and such are internal. It even says on their auction ALL WIRING FOR THE HEADLIGHTS ARE PRE-ASSEMBLED FOR ESSENTIAL PLUG & PLAY APPLICATIONJeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

ok just wanted to make sure cuz they burned out on my buddy other civic2015 Hyundai Genesis Ultimate Black on Black

Tinted Windows, Fogs, Roof Spoiler, ARK Springs, Ruff R1 20's Staggered

I'm thinking it wasn't the lights that burned out the other Civic rather wiring was improperly connected.Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

I wired it up for him to the parking light. Positiv to positve and neg to neg , soder and heat shink down2015 Hyundai Genesis Ultimate Black on Black

Tinted Windows, Fogs, Roof Spoiler, ARK Springs, Ruff R1 20's Staggered