dual microwave sensor?

ok i'm a  little confused on something  can any on out their please explain to me what does a dual microwave sensor do ?  i took this sensor to be a force feild around the vechile  as you approach the vechile it would give a warning signal that their is an alrm on the vechile is this some what how this device works ? and inside protection like if you stick your hand through the window the alarm activates ? The sensor is bought from asian wolf  the wiring digram states  red ,positive ; black ,ground; blue ,interior (where does this wire connect too );green ,exterior. (were does this wire connect too).can and does this sensor replace the shock sensor? lets say it don't  how do i connect these sensor to one alarm that has only one sensor input wire. also if i had a glass sensor as well . If i connect all of the sensor up will they all work correctly or will they conflict with each other ? duallyit

What alarm do you have? anyways Blue from the asain wolf is full trigger (longer than .8) Green is warn away (shorter than .8) Most alarm are like DEI where you can do this: Do not use the 12v and ground from the shock sensor! (the asianwolf must have its own)Note: You Always Dont Get What You Pay For.

If your alarm does not have the dual stage (warn away and full trigger) then you do not need the warn away wire. If your alarm has an instant trigger wire, you can also hook up your sensor to that. But it will not have the dual stageNote: You Always Dont Get What You Pay For.

 i'm sorry i have the asian wolf v2009 alarm. duallyit