the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

What is the Big difference? 12Vdc


Post ReplyPost New Topic
< Prev Topic Next Topic >
percyv143 
Copper - Posts: 77
Copper spacespace
Joined: December 18, 2004
Location: United States
Posted: August 26, 2006 at 1:59 AM / IP Logged  
Hi. I have a CRV 2006 V4 and I am using it for work. I am using some equipment in the car and this is what I had observed. I have a direct wire tap from the battery (fused) to connect some equipment like laptop and/or other equipment. I noticed that my equipment had a problem with the voltage input if it was connected thru the wire directly connected to the battery but when I had connected it thru the cigarette lighter the equipment worked fine. The cigarette lighter socket has only 10A and my direct batt wire has a 20A fuse. What is the big difference why the cig-socket has better voltage output than the direct batt wire? Please explain. Thank you.
geepherder 
Platinum - Posts: 3,668
Platinum spaceThis member consistently provides reliable informationspace
Joined: October 27, 2003
Posted: August 26, 2006 at 6:06 AM / IP Logged  
The lighter plug most likely has filtration built-in, such as a voltage regulator, capacitor, etc.
My ex once told me I have a perfect face for radio.
audiocableguy 
Copper - Posts: 630
Copper spacespace
Joined: January 27, 2003
Location: Idaho, United States
Posted: August 26, 2006 at 8:00 AM / IP Logged  
What guage of wire to the battery and how long? Also do you have a sufficient ground?
auex 
Platinum - Posts: 5,041
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 23, 2002
Location: Arizona, United States
Posted: August 26, 2006 at 8:27 AM / IP Logged  
audiocableguy wrote:
Also do you have a sufficient ground?
That is probably it.
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
percyv143 
Copper - Posts: 77
Copper spacespace
Joined: December 18, 2004
Location: United States
Posted: August 26, 2006 at 3:01 PM / IP Logged  
I had connected the negative and positive wires to the batt by using an alligator clip that came with a power inverter kit. The size of the clip is approx. 3". The length of the wire is about 10 feet and gauge is probably 12. The wire has a switch and an inline fuse of 20A. Would it really make a difference if the wires are connected to the batt by means of a screw not just the alligator clips? Thanks for the replies.
percyv143 
Copper - Posts: 77
Copper spacespace
Joined: December 18, 2004
Location: United States
Posted: August 26, 2006 at 10:39 PM / IP Logged  
Ok. I'll check out those connectors at an auto shop tomorrow and hopefully it will output a better voltage for my equipment. Thanks.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, April 27, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer