Replace Speaker s in 06 Ford Explorer

Home / the12volt's Install Bay / Car Audio / Replace Speaker s in 06 Ford Explorer (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Roveer

Member - Posts: 27

Joined: February 22, 2004

Location: United States

Posted: September 17, 2006 at 3:26 PM / IP Logged

Replace Speaker s in 06 Ford Explorer - Last Post -- posted image.

I pulled the door panel from my 06 Ford Explorer thinking I would find a 6x8 speaker. What I found was this. So the question is, will my MB Quart PCS 213's sound a lot better than this?

I'm told that the audiophile stereo is 290 watts. I've found 4 of these in each door, they are marked 25w then there is a sub. Does anyone know what the distribution of power is on this setup? Maybe 50x4+90???

Roveer

Back to Top

kicker guy

Copper - Posts: 86

Joined: August 25, 2006

Location: United States

Posted: September 17, 2006 at 4:14 PM / IP Logged

Those will sound better than your stock speakers yes.... but I would try to go with 6.5s instead.... and for the output im not sure... it sounds like 50x4 and 90 for sub output is right if it is 290 watts

Back to Top

aznboi3644

Gold - Posts: 2,600

This member consistently provides reliable information

Joined: May 01, 2006

Location: United States

Posted: September 17, 2006 at 4:30 PM / IP Logged

That is a 6x8 speaker...just a plate speaker with components

Back to Top

Roveer

Member - Posts: 27

Joined: February 22, 2004

Location: United States

Posted: September 17, 2006 at 5:09 PM / IP Logged

My point about 6x8 is that it's not a true 6x8. The midrange is more like 4" with a tweater on the side. Based on that I think I'll have good results with my MB Quart 5 1/4's. My next challenge is to figure out where to put the MB Quart crossover's they are pretty big.

Am thinking of staying with the stock wire so I don't have to go through heck to bring new wire out the doors. Anyone want to weigh in on that, or should I suffer the pain for a better result?

Roveer

Back to Top

aznboi3644

Gold - Posts: 2,600

Joined: May 01, 2006

Location: United States

Posted: September 17, 2006 at 7:24 PM / IP Logged

Um...I tried running new wires on my explorer...was nothing like the "how to wire through a door molex" stickey.

It's kinda hard...but I gave up after like 5 minutes

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Replace Speaker s in 06 Ford Explorer

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.