the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2006 VW Passat Alarm/Remote Start Wiring


Post ReplyPost New Topic
< Prev Topic Next Topic >
draeger 
Member - Posts: 3
Member spacespace
Joined: June 29, 2005
Location: United States
Posted: September 17, 2006 at 9:27 PM / IP Logged  
Anyone have a wiring diagrams for a 2006 Volkswagen Passat, I will be installing a Viper alarm in my friends and haven't done a install on the newier VW models, just 2002 and earlier. Main things I need are 12v, remote, start and horn. Any help would be great.
Thanks
gcorrea 
Silver - Posts: 436
Silver spacespace
Joined: May 22, 2004
Location: United States
Posted: September 17, 2006 at 10:08 PM / IP Logged  
12volts
      red (x2)
      +
      ignition harness
     
Starter      RED / black       +       ignition harness      
Second Starter      N/A                  
Ignition      black       +       ignition harness      
Second Ignition      N/A                  
Third Ignition      N/A                  
Accessory      yellow/black       +       ignition harness      
Second Accessory      N/A                  
Keysense      red       +       ignition harness      
Power Lock      RED / green       -       driver door module in door      
Power Unlock      RED / blue (double pulse)       -       driver door module in door      
Lock Motor      BLACK/ blue       5wi      driver door module in door      
Unlock Motor      BLACK/ gray       5wi      driver door module in door      
Parking Lights+      GREEN/ red       +       headlight switch      
Parking Lights-      N/A                  
Hazards      same as turn signal wires                  
Turn Signal(L)      BLACK/ white       +       comfort module, 15 pin plug, pin 15      
Turn Signal(R)      BLACK/ green       +       comfort module, 15 pin plug, pin 14      
Reverse Light      blue/red       +       driver kick, harness to rear      
Door Trigger      BROWN / yellow       -       comfort module, 23 pin plug, pin 1      
Dome Supervision      blue/gray       -       comfort module, 23 pin plug, pin 21      
Trunk/Hatch Pin      BROWN / black       -       comfort module, 23 pin plug, pin 10      
Hood Pin      BROWN / red       -       comfort module, 15 pin plug, pin 5      
Trunk/Hatch Release      BROWN / gray to BROWN / green       -       comfort module, 23 pin plug, pin 2      
Power Sliding Door      N/A                  
Factory Alarm Arm      arms with lock                  
Factory Alarm Disarm      disarms with unlock                  
Disarm No Unlock                       
Tachometer      NOT blk/blue or grn/red (W8)       ac       any fuel injector      
Wait to start      N/A                  
Brake Wire      RED / black       +       brake pedal switch      
Parking Brake      BROWN / white       -       parking brake switch      
Horn Trigger      BLACK / YELLOW (alarm horn)       +       comfort module, 15 pin plug, pin 11      
Memory Seat 1      yellow/black       -       memory switch on driver seat      
Memory Seat 2      yellow/red       -       memory switch on driver seat      
Memory Seat 3      yellow/blue       -       memory switch on driver seat      
Interface Modules
Smart Starter Kill Relays
MAKE : VOLKSWAGEN | MODEL : PASSAT | YEAR : 2004
* The logo is registered trade mark of Volkswagen Corporate.
Copyright © 2000-2006 Directed Electronics, Inc. All Rights Reserved. Revised: 25 March 2006
This website is for the sole use of authorized DEI personel and it's participating installers and retailers. The information contained on these pages may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited.
Having trouble using this site? Let us know - webmaster@directechs.com
hope this helps
gcorrea
draeger 
Member - Posts: 3
Member spacespace
Joined: June 29, 2005
Location: United States
Posted: September 18, 2006 at 12:17 AM / IP Logged  
Hey anything will help at this point lol. Thanks for the promptness on the info because I will be doing it tomorrow. I'll make note of what is what color and where if anything defers from the info you provided.
Thanks,
Chris
draeger 
Member - Posts: 3
Member spacespace
Joined: June 29, 2005
Location: United States
Posted: September 24, 2006 at 6:46 PM / IP Logged  
12v - RED / white thicl gauge wire at the bottom of the relay box
Remote - black    "            "               "
Starter - RED / blue thick gauge wire at interior firewall
Horn - black thin gauge wire at the bottom of the relay box behind the horn relay
KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: September 24, 2006 at 9:51 PM / IP Logged  
Remote start / security / GPS
Wire/Function Colour Location/Description Polarity
PASSIVE ANTI-THEFTYESTRANSPONDER (Bypass or Data module required) SEE NOTES
This vehicle is equipped with an IMMOBILIZER passive anti-theft system. Please refer to the diagram for proper bypass instructions.
12 VOLTSRedBehind the fusebox on the left side of the dash +
IGNITIONRED / bluePin-4 on Ignition switch connector +
See the provided document for exact pin locations.
IGNITION 2GREEN/ gray & GreenPin-12 and Pin-1 on Ignition switch connector +
See the provided document for exact pin locations.
STARTERRED / grayPin-3 on Ignition switch connector +
See the provided document for exact pin locations.
STARTER 2RED / grayPin-11 on Ignition switch connector +
See the provided document for exact pin locations.
KEY SENSEGreenPin-1 on Ignition switch connector +
This wire is required for remote start and should be energized before ignition.
LOCKWhite (1-3)At module in driver's door -
1-wire system. Straight ground (-) to lock and ground through 180-ohm resistor to unlock.
UNLOCKWhite (1-3)At module in driver's door -
1-wire system. Straight ground (-) to lock and ground through 180-ohm resistor to unlock.
TRUNK RELEASEGREEN/ blackIn driver's door at switch -
FACTORY ARMArms with lock
FACTORY DISARMThrough OEM remote only
Alarm will disarm automatically on remote start when the transponder is detected.
BRAKESWITCHRED / blackIn the driver's kickpanel +
PARKLIGHTSRED / blue & WHITE/ blackAt the lightswtch in the dash
This requires so special wiring, please refer to the parklight diagram.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, December 8, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer