2001 toyota tundra door locks

 If anyone can help me with specifics I would greatly appreciate it. I have all of the wiring info on this truck, and I have already done a search on this site, finding more good info in doing so, but I need some positive info from someone who has actually worked on this truck. My question is this: Where exactly do I find the unlock wires for this truck? The lock and unlock from the ultrastart 2270 is (-)500ma, and I am sure that they will trigger the factory relays for the locks. I just need to know exactly where they are. Thanks for all the help.jmacf14

Also I am told that I wont need any kind of bypass module for this truck. It doesn't even have remote locks from the factory let alone an alarm. Wondering about a transponder or key since wire though. Thanks againjmacf14

12volts       WHITE/ red or white       +       ignition harness       Starter      GREEN/ black       +       ignition harness       Second Starter                        Ignition      BLACK / YELLOW       +       ignition harness       Second Ignition      BLACK/ red       +       ignition harness       Third Ignition                        Accessory      blue/red       +       ignition harness       Second Accessory                        Keysense                        Power Lock      WHITE/ green       -       either kick panel       Power Unlock      RED / yellow       -       either kick panel       Lock Motor      blue/white             drivers door harness       Unlock Motor      BLACK / YELLOW             drivers door harness       Parking Lights+      green             drivers kick panel       Parking Lights-      RED / black             steering column       Hazards                        Turn Signal(L)                        Turn Signal(R)                        Reverse Light                        Door Trigger      WHITE/ blue       -       drivers door harness       Dome Supervision      use door trigger                   Trunk/Hatch Pin                        Hood Pin                        Trunk/Hatch Release                        Power Sliding Door                        Factory Alarm Arm                        Factory Alarm Disarm      blue/black       -       drivers door harness       Disarm No Unlock                        Tachometer      black or blu/wht             instrument cluster, brn plug       Wait to start                        Brake Wire      GREEN / WHITE       +       drivers kick panel       Parking Brake                        Horn Trigger      GREEN/ red       -       steering column       Memory Seat 1                        Memory Seat 2                        Memory Seat 3                        Interface Modules Smart Starter Kill Relays MAKE : TOYOTA | MODEL : TUNDRA | YEAR : 2001 * The logo is registered trade mark of Toyota Corporate. Copyright © 2000-2006 Directed Electronics, Inc. All Rights Reserved. Revised: 25 March 2006 This website is for the sole use of authorized DEI personel and it's participating installers and retailers. The information contained on these pages may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. hope this helps some.gcorrea

Your alarm will trigger the factory relays fine using the wires stated above. There is no transponder in any Tundra, even new ones.Mike M2

Tech Manager

CS Dealer Services

so I'll tap into the WHITE/ gren and RED / yellow to trigger the factory relays? sounds good. Thanks for the info. Any other input?jmacf14

You've got it. Those are one of the easiest trucks to install on. Just connect to the unlock & lock wires direct from the alarm. Thats allSouthern Stylez

Jacksonville, FL 32218

 well thanks for all of the help guys, this install went very smooth, had everything installed soldered and tested in a little over 4 hours. all done so thanks again!jmacf14