2006 acura rsx and tl schematics

Home / the12volt's Install Bay / Car Security and Convenience / 2006 acura rsx and tl schematics (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

davelamchop

Member - Posts: 2

Joined: January 30, 2003

Location: United States

Posted: October 04, 2006 at 1:01 PM / IP Logged

I'm in need of the schematics for an Acura TL and RSX for a remote start install. Any helt will be appreciated. Thanks

Back to Top

shaggy12volt

Copper - Posts: 164

Joined: July 16, 2002

Location: Ohio, United States

Posted: October 04, 2006 at 11:04 PM / IP Logged

what year never mind i see it been a long day let me look

here you go

WIRING INFORMATION - ACURA / TL / 2006 / Remote Start

[PRINT THIS PAGE]

12volts	white (50A)	+	ignition harness
Starter	BLACK/ white	+	ignition harness
Second Starter	N/A
Ignition	BLACK / YELLOW	+	ignition harness
Second Ignition	N/A
Third Ignition	N/A
Accessory	BLACK/ red	+	ignition harness
Second Accessory	WHITE/ red	+	ignition harness
Keysense	RED / white	-	ignition harness
Power Lock	pink/black	-	green plug, left side of fuse box
Notes: These wires will meter when using the passenger door lock switch.
Power Unlock	pink/blue	-	green plug, left side of fuse box
Notes: These wires will meter when using the passenger door lock switch.
Lock Motor	yellow/black	5wi	green plug, front of fuse box
Unlock Motor	YELLOW /GREEN	5wi	green plug, front of fuse box
Parking Lights+	RED / black	+	large white plug, top of fuse box
Parking Lights-	RED / black	-	headlight switch in column cover
Hazards	GREEN/ red	+	large white plug, top of fuse box
Turn Signal(L)	RED / blue	+	large white plug, top of fuse box
Turn Signal(R)	white	+	large white plug, top of fuse box
Reverse Light	green	+	driver kick, harness to rear
Door Trigger	see notes	-	rear of fuse box
Notes: The LF door is green in a 16 pin plug, pin 15. The RF door is lt. GREEN/ red in a 14 pin plug, pin 12. The LR door is GREEN/ YELLOW in a 16 pin plug, pin 14. The RR door is GREEN / WHITE in a 14 pin plug, pin 13. Use all four wires and diode isolate each.
Dome Supervision	GREEN/ red	-	green 5 pin plug, rear of fuse box
Trunk/Hatch Pin	blue / YELLOW	-	green plug, left side of fuse box
Hood Pin	yellow/red or GREEN/ black	-	hood pin switch in latch
Trunk/Hatch Release	YELLOW /GREEN or blue/black	+	driver kick, harness to rear
Power Sliding Door	N/A
Factory Alarm Arm	blue/white to WHITE/ red	-	driver door module in door
Factory Alarm Disarm	BLACK/ red to white	-	driver door module in door
Disarm No Unlock	see factory alarm disarm
Tachometer	NOT yellow/black	ac	any fuel injector
Wait to start	N/A
Brake Wire	WHITE/ black	+	brake pedal switch
Parking Brake	GREEN/ orange	-	large white plug, top of fuse box
Horn Trigger	GREEN/ YELLOW	-	horn switch
Memory Seat 1	blue / YELLOW	-	driver door module in door
Memory Seat 2	RED / yellow	-	driver door module in door
Memory Seat 3	N/A	-

2006 acura rsx and tl schematics -- posted image.

Interface Module:	Category: Immobilizer Bypass	Required: Yes	Type: Transponder
Part #: 556HW
Alternate Part1 #: 556UW
Alternate Part2 #: DesignTech 20402
Alternate Part3 #: DesignTech 29402
Notes: Standard on all models. When using the 556HW, follow the mode 1 wiring diagram. The reference wire is BROWN / yellow, data wire is RED / blue and ignition wire is BLACK/ green.

The Shagmaster

1999 Chevy Suburban 15" lift sittn on 22's sets 7'5"

1992 Chevy Astro Van all Bagged out Dubbed THE SUICIDER

Installing for over 18 years Looking for empolyment NOW send PM for resum

Back to Top

shaggy12volt

Copper - Posts: 164

Joined: July 16, 2002

Location: Ohio, United States

Posted: October 04, 2006 at 11:12 PM / IP Logged

WIRING INFORMATION - ACURA / RSX / 2006 / Remote Start

[PRINT THIS PAGE]

12volts	white (40A)	+	ignition harness
Starter	BLACK/ white	+	ignition harness
Second Starter	N/A
Ignition	BLACK / YELLOW	+	ignition harness
Second Ignition	N/A
Third Ignition	N/A
Accessory	BLACK/ red	+	ignition harness
Second Accessory	WHITE/ red	+	ignition harness
Keysense	RED / white	-	ign harn or security control unit
Notes: The security control unit is to the left of the steering column.
Power Lock	WHITE/ blue	-	driver kick, door harness
Notes: Also found at the multiplex control unit on the back of the fuse box in a 13 pin plug, pin 12.
Power Unlock	WHITE/ green	-	driver kick, door harness
Notes: Also found at the multiplex control unit on the back of the fuse box in a 13 pin plug, pin 10.
Lock Motor	yellow/black	5wi	driver kick, door harness
Unlock Motor	YELLOW /GREEN	5wi	driver kick, door harness
Parking Lights+	RED / black or RED / yellow	+	fuse box
Parking Lights-	blue	-	switch or security control unit
Notes: The security control unit is to the left of the steering column.
Hazards	same as turn signal wires
Turn Signal(L)	GREEN/ red	+	turn signal switch
Turn Signal(R)	GREEN/ YELLOW	+	turn signal switch
Reverse Light	green	+	kick panel, harness to rear
Door Trigger	green (D), lt. GREEN/ red (P)	-	security control unit
Notes: Use both wires and diode isolate each. The security control unit is to the left of the steering column.
Dome Supervision	GREEN/ red	-	driver A pillar
Notes: Also found at the rear of the fuse box in a 12 pin plug, pin 7.
Trunk/Hatch Pin	red	-	security control unit
Notes: The security control unit is to the left of the steering column.
Hood Pin	GREEN/ black	-	security control unit
Notes: The security control unit is to the left of the steering column.
Trunk/Hatch Release	N/A
Power Sliding Door	N/A
Factory Alarm Arm	WHITE/ red	-	security control unit
Notes: Meter this wire while turning the key in the driver door key cylinder. The security control unit is to the left of the steering column. May need to use relay in certain applications.
Factory Alarm Disarm	white	-	security control unit
Notes: Meter this wire while turning the key in the driver door key cylinder. The security control unit is to the left of the steering column. May need to use relay in certain applications.
Disarm No Unlock	see factory alarm disarm
Tachometer	blue	ac	ECM/PCM, white 31 pin plug, pin 25
Notes: The ECM/PCM is under the glove box. Also found at the fuse box, top left, 8 pin plug, pin 5. Can also go to any fuel injector and use the wire that is NOT yellow/black.
Wait to start	N/A
Brake Wire	WHITE/ black	+	brake pedal switch
Parking Brake	GREEN/ orange	-	parking brake switch
Horn Trigger	orange	-	horn switch
Notes: The horn trigger at the security control unit is green.
Memory Seat 1	N/A
Memory Seat 2	N/A
Memory Seat 3	N/A

Interface Module:	Category: Immobilizer Bypass	Required: Yes	Type: Transponder
Part #: 556HW
Alternate Part1 #: 556UW
Alternate Part2 #: DesignTech 20402
Alternate Part3 #: DesignTech 29402
Notes: Standard on all models. When using the 556HW, follow the mode 1 wiring diagram. The reference wire is BROWN / yellow, data wire is RED / blue and ignition wire is BLACK / YELLOW.

The Shagmaster

1999 Chevy Suburban 15" lift sittn on 22's sets 7'5"

1992 Chevy Astro Van all Bagged out Dubbed THE SUICIDER

Installing for over 18 years Looking for empolyment NOW send PM for resum

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2006 acura rsx and tl schematics

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.