the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

sub box design


Post ReplyPost New Topic
< Prev Topic Next Topic >
will_22_82 
Copper - Posts: 89
Copper spacespace
Joined: October 07, 2006
Location: United States
Posted: October 08, 2006 at 9:08 PM / IP Logged  
i am designing a wall in my car i know the basic design of the box and the ports. I am running one memphis mojo 15 " and four JBL Power Series P1224 12 " in a 2 door hatchbach ford escort running two kinetic 800 amp batteries on 2 hiphonics brutus amps rated at 1600 watts a piece. but i need to know more about the box design w/ the ports. of course it will be dual chambers behind the driver side. These pics are some specs i have anyone have any other ideas, port changes, etc.
will_22_82 
Copper - Posts: 89
Copper spacespace
Joined: October 07, 2006
Location: United States
Posted: October 08, 2006 at 9:13 PM / IP Logged  
sub box design - Last Post -- posted image.sub box design - Last Post -- posted image.
bigste925 
Member - Posts: 21
Member spacespace
Joined: January 28, 2006
Location: United States
Posted: October 11, 2006 at 10:10 AM / IP Logged  
why are you running a 15 of one brand and four 12s of another. you will get a lot of sound but it will be very hard to tune because each sub is rated differently
will_22_82 
Copper - Posts: 89
Copper spacespace
Joined: October 07, 2006
Location: United States
Posted: October 11, 2006 at 2:31 PM / IP Logged  
yeah i know, i could go with a 12, but there is a really small price difference between the 15 and the 12, so i'm going bigger. it will take time to tune the frequency right, but i think it will be worth it.
bigste925 
Member - Posts: 21
Member spacespace
Joined: January 28, 2006
Location: United States
Posted: October 11, 2006 at 3:49 PM / IP Logged  
Why dont you just do 4 15's instead. The 4 12's are basically equivalent to 3 15's. You only loosing 3 inches of sub but you also wont need as much box space cuz its 4 instead of 5 and you can make the box one whole chamber unless you plan on porting it. if you port it you can do 2 chambers or you can even seal it and have 4 equal chambers. 60" vs 63"? when you get to that much surface area and power it really wont matter
will_22_82 
Copper - Posts: 89
Copper spacespace
Joined: October 07, 2006
Location: United States
Posted: October 12, 2006 at 11:55 AM / IP Logged  
i already have the 4 12's and i'm sure no one will pay me 800.00 for them either. the mojo i ahve yet to get.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer