the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Where to get fiberglass materials online


Post ReplyPost New Topic
< Prev Topic Next Topic >
kosoku 
Copper - Posts: 76
Copper spacespace
Joined: December 16, 2004
Location: United States
Posted: October 18, 2006 at 9:31 PM / IP Logged  
I remember seeing links on here before for shops that sell fiberglass mat online.  I can't dig seem to dig them up now.  Anyone mind reposting?
sideworks 
Member - Posts: 3
Member spacespace
Joined: October 18, 2006
Location: United States
Posted: October 19, 2006 at 4:11 AM / IP Logged  
www.selectproducts.com sells them, but you can probably find better deals out there.
Mike
1995 Honda Civic - ITR Swap
Alpine/Focal/DEI
J1brew 
Member - Posts: 12
Member spacespace
Joined: July 02, 2004
Location: United States
Posted: October 19, 2006 at 11:39 AM / IP Logged  
  I always use fiberglasswarehouse.com  they have great prices and a good selection of stuff...
djdowdell 
Copper - Posts: 60
Copper spacespace
Joined: December 07, 2005
Location: Kentucky, United States
Posted: October 19, 2006 at 4:56 PM / IP Logged  
Try www.selectproducts.com . Yes I work for them, but I also use our products not only on our show car but I am working on my own personal car. We are always trying to stock the best products and products no one else can get so that's why u MAY find cheaper prices but you most likely will get an inferior product. The owner diligently researches for product lines that are not only durable, but easy to work with and saves you lots of time. We carry hi strength poly resin, bubble gum resin( love that smell), lay-up adhesive, winter catalyst, milled fibers, foams, fabric, etc. I suggest you try one of the products sometime, you might like it. Especially the tooling resin that does not shrink. If u are on a strict budget and need to much worried about time or anything get the cheap stuff, but for show quality and time savings check out some of our stuff.
Pure Noize
J1brew 
Member - Posts: 12
Member spacespace
Joined: July 02, 2004
Location: United States
Posted: October 22, 2006 at 12:58 AM / IP Logged  

i think that i would like to save some money...  select sells 5gal. @ $154.45 +S&H   warehouse sells 5gal. @ $103.10 +S&H you do the math.  also, I found out about this site at training. The way i see it, if its good enough for MARK _UDA & RTTI to build all of the ROCKFORD FOSGATE cars, then its good enough for me...

but for anyone that is looking for some really good stuff here you go.

www.installedge.com

www.fiberglast.com

www.uscomposites.com

www.smooth-on.com

www.fiberglasswarehouse.com

www.levineautoparts.com

www.3m.com/us

www.eastwoodcompany.com

www.mcnichols.com/products

www.imsmetals.com

www.regal-plastics.com

www.gepolymershapes.com

www.mcmaster.com

www.e-lite.com

www.beingseen.com

www.neontime.com

www.digikey.com

www.theinstallbay.com

This is just some info to share with everyone else...  these are all websites from training with MARK _UDA.

if you are an installer and know the history of your career, then you should know who MARK _UDA is... if not look him up on the net...          

this post is not meant to put down select products in any way, just to let people know there is other places out there.

so to make a point where you said "but you most likely will get an inferior product" that sounds like what a salesman would say. i thought that this site was to help everyone, not to sell stuff for the company that we may work for...

J1brew 
Member - Posts: 12
Member spacespace
Joined: July 02, 2004
Location: United States
Posted: October 22, 2006 at 1:02 AM / IP Logged  
   the name at the bottom is MARK   F_U_K_U_D_A   it was all chopped up so lets see if this works...
djdowdell 
Copper - Posts: 60
Copper spacespace
Joined: December 07, 2005
Location: Kentucky, United States
Posted: October 22, 2006 at 5:17 PM / IP Logged  
J1BREW wrote:

. i thought that this site was to help everyone, not to sell stuff for the company that we may work for...

Hmmm, get your panties out of a bunch. I put in my $.02 to help everyone. Remember I said, MAY get an inferior product, not will! And salesman or not I also install and I am certified in both. I only offered the products I sell because I have used them personally. Now the other sites and products I have not but compared to the stuff I was using when I lived in Kentucky that I could get our products are better. We even have better resin than I was able to get a the boating supply store there. Some of you guys need to think before you type! I only gave advice on what I know and that is our products. Some people give advice on advice that was given to them. I only speak about what I know. Also, different products work for different people. Select products is not the holy grail of installation materials. If it were I would be rich but i'm not. Oh, btw Galpin (Pimp My Ride) uses our stuff, so therefore it must have some merit. Just do your research and use the products that suit you. One!

Pure Noize
djdowdell 
Copper - Posts: 60
Copper spacespace
Joined: December 07, 2005
Location: Kentucky, United States
Posted: October 22, 2006 at 5:27 PM / IP Logged  

(post script) Mark is cool, we actually use his router shield in our Router video and Rob Garza (company owner) gives him a plug. I think Rob and Mark are cool. Maybe ask Mark about Select Products sometime.Where to get fiberglass materials online -- posted image.

Pure Noize
J1brew 
Member - Posts: 12
Member spacespace
Joined: July 02, 2004
Location: United States
Posted: October 22, 2006 at 6:34 PM / IP Logged  

i am not going to argue about this with you.  i was just posting some other sites for help. it seems that if anyone on this site ask where to get some stuff, everyone is quick to post selectproducts. i have used both of SP's resin it is not bad just over priced, like most of there stuff.  now everyone knows that they can choose, there is options.

djdowdell 
Copper - Posts: 60
Copper spacespace
Joined: December 07, 2005
Location: Kentucky, United States
Posted: October 23, 2006 at 11:04 AM / IP Logged  
J1BREW wrote:

....it seems that if anyone on this site ask where to get some stuff, everyone is quick to post selectproducts. ....

There might be a reason for that.Where to get fiberglass materials online -- posted image.

Pure Noize

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 6, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer