the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

07 Suburban Door lock problem


Post ReplyPost New Topic
< Prev Topic Next Topic >
csorb 
Copper - Posts: 317
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 28, 2002
Location: United States
Posted: October 19, 2006 at 12:55 AM / IP Logged  
Did a Remote Start/Alarm on this one. Used the xk01-gmdl6. After locking with the remote and then unlocking the doors unlock fine but then for some reason lock again on their own. If I hit unlock again, they stay unlocked. Anybody seen this?
Hymer 
Silver - Posts: 695
Silver spacespace
Joined: November 20, 2004
Location: United States
Posted: October 19, 2006 at 9:55 AM / IP Logged  
see what the vehicles lock options are programed for on the instrument cluster... what year burban?
Tire Proz Stillwater Mn
High End Restyling and Comlete Repair
csorb 
Copper - Posts: 317
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 28, 2002
Location: United States
Posted: October 24, 2006 at 9:39 AM / IP Logged  
Solved the problem. The brown wire into the xko1 was being pulsed during unlock. The removal of ground from this wire causes doors to lock. We just used a different ground out when running.
Hymer 
Silver - Posts: 695
Silver spacespace
Joined: November 20, 2004
Location: United States
Posted: October 24, 2006 at 9:45 AM / IP Logged  
Note to self "make sure not to pulse the ground out when running on dl modules".. Heh glad ya found it...
Tire Proz Stillwater Mn
High End Restyling and Comlete Repair
csorb 
Copper - Posts: 317
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 28, 2002
Location: United States
Posted: October 29, 2006 at 3:38 PM / IP Logged  
You have to connect the ground out when running, otherwise the factory alarm will go off when you remote start. Just make sure to have it on steady and not pulsed. Thanks

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, May 2, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer