Clifford 3.5, evo9

i am just wondering is there anything important contains in the owner manual ( the one teachs you how to program and stuff)  like a code or anyhting

caz i dont have mine, but i mean its alright, i am not installing turbo timer or anything, but i do use rs from time to time

everythign seems working fine, except i cant start my car with my key,, i can only start it with my remote..  thats about it

everything seems working fine,

so ya is there anyhitng important in that owner manual.. is there a online version anywhere??

thanks

it was DIY all the way

i wanted to learn how to install alarm, and i start to zero knowledge in electrical doodiez..

but i manged to do a little search around, and tests  and my rs , alarm works fine.

thanks for the quick reply

is there any clifford coding on the book or anything like that

i dont understand the way tou side by taping a few times? can you explain a little more thanks

i wanted to know is there anything major to take out to install a possible a Remote start. clifford 3.5? to a evo 9 that is equip with factory keyless entry?

is clifford 3.5 capable bypassing itself? or do i have to do anything..

if so, i wanted to install a alarm on my car, and i really dont care about remote start, so wat will be my options?.. what did most of ya evo 9 owner do to your car.?  and i just feel unsave to have a 39k car w.o secuity.

i just finish installing my remote start 2 days ago, and while i was trying to clean up all the wires and stuff, i had to disconnet most of the wires to do the clean up

but now everything is plug back in my remote start is back to the previos problem. the remote start brain is not getting any signal

the previous problem i had was i was not getting a good 12v .. but now i check the 12v cord and it getting lots of voltage..   I had done a lot of button pressing from last time, and i mihgt have trigger something to make it work last time, and since i total d/c everything i might have forgot soemthing

one thing that my rs is not working is i cant start my car with they key, this happen even when i had my remote start working, i had to start up the car by remote 2 days ago, so how do i the tach learnin is it nesscary to do it?.. if i can fire up my car how can  i do the tach learning.. beside the tach learn is there anything else i need to do??

my alarm is working fine like before, i was just using my alarm for the last week w/o the remote untill i figure that the 12v was bad.. but i double check with a mulitmeter that i am getting voltage directly from the battery

thanks

just a litle bit more.. i know for the fact that it seems to me that no power is going to the relay or my remote is not giving signal to it.

i know that i need to hear the little click sound on the relay  if i press the rs start twice.. but i got nothing, it seems like i dont a 12v connects to it.. and i get the signal on my remote " the signal icon will be displayed if a command is transmited to the vehicle but a command page is not recieved"