04 Silverado Sport side

Home / the12volt's Install Bay / Car Security and Convenience / 04 Silverado Sport side (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

magicmanwv

Member - Posts: 13

Joined: October 09, 2006

Posted: November 13, 2006 at 5:21 PM / IP Logged

I did get the 560 into program mode I took the green H1/5 to ground did the program parking light flash to constant worked for the flashing lights now if I could figure out the door lock problem I would be a Happy Camper also does any one know how to keep the doors from unlocking during remote start (factory option) or start with key? Thanks agian

magicmanwv

Member - Posts: 13

Joined: October 09, 2006

Posted: November 14, 2006 at 5:26 PM / IP Logged

Is there any way to ck the the lock and unlock wires from the 560? I have tried everything to get the 457G to work diode the ground,power from the data buss ck the wires even unplugged the wires from the brain as soon as I plug it back up the doors unlock. The 457 is showing power on the blue unlock wire? anybody?

magicmanwv

Member - Posts: 13

Joined: October 09, 2006

Posted: November 14, 2006 at 6:50 PM / IP Logged

I just ran a test on the trigger wires with a greenlee DMM the red lead to +12 the black to the green door lock harness unhooked it reads 12v hit the lock on the remote only dropped like .02 same with blue reads 12v hit unlock drops the same

anybody?

magicmanwv

Member - Posts: 13

Joined: October 09, 2006

Posted: November 14, 2006 at 7:35 PM / IP Logged

I hope the more info I give the better someone can help me so I ck'ed the 457G so I tapped ground with the blue wire doors unlocked,tapped to ground L green doors locked security lite went solid not flashing like it would if you used the door lock switch drivers side

magicmanwv

Member - Posts: 13

Joined: October 09, 2006

Posted: November 17, 2006 at 9:33 PM / IP Logged

anyone?

JWorm

Platinum - Posts: 2,208

Joined: December 11, 2002

Location: New Hampshire, United States

Posted: November 17, 2006 at 11:45 PM / IP Logged

I would suggest having the Viper doorlock outputs trigger a couple relays which feed ground to the 457G, or use a 451M.

Are you saying the truck unlocks after you start it with the key? If so, I think you may have a wiring problem. I don't think that is a programmable option on the bypass, or the truck.

magicmanwv

Member - Posts: 13

Joined: October 09, 2006

Posted: November 19, 2006 at 4:59 PM / IP Logged

Just as soon as you turn the key you here the doors unlock

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

04 Silverado Sport side

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.