the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Matrix RS 3.5 wiring


Post ReplyPost New Topic
< Prev Topic Next Topic >
mugpar 
Copper - Posts: 100
Copper spacespace
Joined: January 28, 2003
Location: United States
Posted: November 16, 2006 at 5:28 PM / IP Logged  
Right, i got that, but on the second start resistor, pin 85, the purple negative start wire, where does this hook up to. The starter wire in the vehicle? key side, or motor side?
Mike M2 
Platinum - Posts: 2,652
Platinum spacespace
Joined: June 29, 2005
Location: United States
Posted: November 16, 2006 at 8:48 PM / IP Logged  
The second starter wire is PURPLE / brown. you must send a negative thru a 180ohm resistor during crank...
Mike M2
Tech Manager
CS Dealer Services
mugpar 
Copper - Posts: 100
Copper spacespace
Joined: January 28, 2003
Location: United States
Posted: November 16, 2006 at 9:02 PM / IP Logged  
ok, not sure if i wrote this right. I have the acc relay hooked up, on the second starter relay, i have pin 87 grounded with a 180ohm resistor, 86 is +12volt, 30 is going to the 2nd start wire, motor side. Pin 87a is nothing, pin 85 is purple negative start wire, according to directfax 1084. What is the purple negative start wire is what im asking, is it the starter wire in the vehicle, or is there a wire coming off of the unit that this goes to? Thanks for any help.
Mike M2 
Platinum - Posts: 2,652
Platinum spacespace
Joined: June 29, 2005
Location: United States
Posted: November 17, 2006 at 6:26 PM / IP Logged  
The truck ahs two starter wires, one positive, one negative. One gets a positive from the RS thru the fat green, the other gets a resisted value negative supplied thru the separate relay. The purple wire they mention on the 1084 is the wire on the small 4 pin plug next to the ribbon cable on the relay pack on the 3.5....
Mike M2
Tech Manager
CS Dealer Services
mugpar 
Copper - Posts: 100
Copper spacespace
Joined: January 28, 2003
Location: United States
Posted: November 17, 2006 at 10:42 PM / IP Logged  
Ok, thanks.
I got that hooked up, as of right now, when you hit r/s, the acc powers up, but the truck just makes about 5 quick ticking sounds, repeats for 3 times, then quits. Any ideas?
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, May 5, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer