vss location for dodge ram 2004 hemi

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / vss location for dodge ram 2004 hemi (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

dodgenav

Member - Posts: 4

Joined: November 28, 2006

Location: United States

Posted: November 28, 2006 at 10:44 AM / IP Logged

i am installing the pioneer avic-n3 and am having trouble with the locator. it seems to be because of the speed sensor. i have a 2004 dodge ram 1500 with the 5.7 hemi. can someone tell me where to locate the vss and hook it up? i have seen other posts that give some information, but not for specifically my truck.

thanks for the help.

Back to Top

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: November 28, 2006 at 5:06 PM / IP Logged

Speed Sense	dk. GREEN/ YELLOW		PCM, top black plug, pin 13
Notes: The PCM is on the passenger side firewall. On diesel models, the vss wire is at the ECM on the lower driver side of the engine, 50 pin plug, pin 11.

Mike M2

Tech Manager

CS Dealer Services

Back to Top

dodgenav

Member - Posts: 4

Joined: November 28, 2006

Location: United States

Posted: November 28, 2006 at 9:17 PM / IP Logged

thanks. does it matter if i have an automatic or manual transmission? I have an automatic.

Back to Top

dodgenav

Member - Posts: 4

Joined: November 28, 2006

Location: United States

Posted: November 28, 2006 at 9:30 PM / IP Logged

one more thing. is there anyway that i can test that that is the correct wire before i cut into it? I don't want to screw up my truck.

Back to Top

dstang24

Copper - Posts: 98

Joined: September 06, 2005

Location: United States

Posted: November 28, 2006 at 10:11 PM / IP Logged

Posted: January 07, 2006 at 4:55 PM - IP Logged

vss location for dodge ram 2004 hemi - Last Post -- posted image.

This is my 2004 Dodge Ram 1500 AT... I installed the N2 recently. Both the VSS and the Reverse wire are by the PCM, which, yes is in the engine compartment. I have a picture of the install. The wire on the right is the VSS wire (solder & tape) while the one on the left (in the t-tap, got lazy) is the reverse wire, which is only hot when the vehicle in RUNNING and in reverse. Again, the engine must be turned over to make this wire go hot.

REVERSE : White w/ light green BY (next to) the PCM -- it was on the front bumper side of the plug that's on the fender there...

VSS: Dark Green w/ Yellow IN (connected to) the PCM

Reminder... This is my '04 and it's a 1500... It seems to be similar to yours so you might use it as a guide.

Hope this helps!

-Dstang24

...This is a forum discussion from earlier this year... These are the wires you are looking for

Team Edge Audio

Back to Top

dodgenav

Member - Posts: 4

Joined: November 28, 2006

Location: United States

Posted: November 29, 2006 at 2:31 PM / IP Logged

Thank you guys for the help

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

vss location for dodge ram 2004 hemi

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.