Viper 791 Subaru Legacy Outback

Home / the12volt's Install Bay / Car Security and Convenience / Viper 791 Subaru Legacy Outback (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

darin13

Member - Posts: 2

Joined: November 26, 2006

Location: United States

Posted: November 30, 2006 at 12:46 AM / IP Logged

Hey guys, I need help with the remote start portion and the option of the rear defrost.

I have all the wiring done and can not get the tach to learn. I used the blue wire at the coil and tested and found about 30ACV. When reading in the install manual I found the parameters to be 1-16 ACV. Is this the problem why I can't get the tach to learn? I tested for voltage at the brain to see if I might have a rip or tear in the wiring from going through the firewall and tested good. Double checked all the connections on the starter wires also. Im thinking I may have to put a resistor in line, it's just a thought? I haven't found anything that might cause a problem, any suggestions are very welcome.

I am also looking for the wire that I can hook my relay up to for the rear defrost to turn on with remote start. If anyone knows please list it.

Thanks - Darin

Back to Top

darin13

Member - Posts: 2

Joined: November 26, 2006

Location: United States

Posted: November 30, 2006 at 12:48 AM / IP Logged

Forgot to mention, it's a 1998 wagon legacy outback.

Thanks again

Back to Top

bryantobando

Copper - Posts: 64

Joined: November 29, 2005

Location: United States

Posted: November 30, 2006 at 11:07 AM / IP Logged

Have you tried using the "voltage check feature" instead of the tach wire. I always use the voltage feature on DEI remote starts instead of the tach wire. It saves you time from searching the tach wire and trying to fish it through the firewall.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Viper 791 Subaru Legacy Outback

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.