the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

flashin led hookup?


Post ReplyPost New Topic
< Prev Topic Next Topic >
ch3at3r 
Member - Posts: 1
Member spacespace
Joined: September 12, 2006
Posted: December 11, 2006 at 11:11 PM / IP Logged  
I got a 98 chevy blazer and my third brake light has a row of led's and what I want to do is remove maybe four led's an put flashing led's that blink when the truck turns off I got an exsiting alarm a viper pager I want to know how to wire those led's with or with out my alarm dont matter I just want them to blink when the truck is off can any one help?
suburban boy 
Copper - Posts: 54
Copper spacespace
Joined: November 14, 2006
Posted: December 31, 2006 at 8:52 PM / IP Logged  

Hey, Get a few leds and put them inside the brake light speratly then wire teh power from your alram to those two or three leds that should work fine.

Suburban boy

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, January 20, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer