Remote Starter, 97 Town & Country

Home / the12volt's Install Bay / Car Security and Convenience / Remote Starter, 97 Town & Country (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

austria

Member - Posts: 2

Joined: December 25, 2002

Location: United States

Posted: January 28, 2003 at 8:18 PM / IP Logged

i have installed a delta ez start 15 into my town&country97 and in the hook up in mentions to connect one wire to 'power lock' and one wire to 'power unlock'. the problem is i can only find one wire that comes out of the lock switch running to the factory alarm. is the lock and the unlock wire the same wire?

Player69

Silver - Posts: 504

Joined: October 27, 2002

Posted: January 28, 2003 at 8:23 PM / IP Logged

Lock - Wht/lt green - ground through 1.5K ohm resistor

Unlock - same wire - ground through 250 ohm resistor.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Remote Starter, 97 Town & Country

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.