96 Grand Cherokee keyless issues

Yup, I had the blue/black wire on the 455 unit hooked up to the BLACK/ blue output before starting on the remote start.

I know this is an old thread I was hoping someone can help me with my situation with my DEI 455TW

I have a THOR 2-way Remote Start/Keyless Entry/Alarm system on my 98 Grand Cherokee i got the DEI 455TW Lock interface module. I connected ebrything as it should be and when locking or unlocking the jeep the locking system goes crazy and rapidly locks and unlocks the jeep.

ADDITIONAL info.

The Remote Starter has a 6 wire keyless entry system (built in relays I guess)

lock and unlock COMMON (output)

lock and unlock NORMALLY OPEN (input)

lock and unlock NORMALLY CLOSED

If the 455 needs NEG(-) input from your alarm, wire your outputs for NEG. Yes the unit has built in relays.

common= pin30, N.O. is pin 87, and the last one is 87a. you know how a relay works ....correct? Wire accordingly.

OK....you won't use N.C.   so disreguard those connections. If it (the 455) requires NEG in, put N.O. to ground. If it (the 455) needs POS(+) input, 12V to N.O. instead of ground.