command start 11 step programming

Home / the12volt's Install Bay / Car Security and Convenience / command start 11 step programming (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

alexlloyd

Member - Posts: 24

Joined: April 06, 2006

Location: Canada

Posted: December 21, 2006 at 5:00 PM / IP Logged

I have a Command Start 290 that takes 11 steps to program the channel 1 functions. Anybody have a manual, I do not care if it is direct for the 290 or not as the two manuals I have for the model show 12 programming steps.

Back to Top

Twelvoltz

Platinum - Posts: 2,384

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: March 24, 2005

Location: New Jersey, United States

Posted: December 21, 2006 at 8:41 PM / IP Logged

Command Start is the same as the Scytek, go to Scytek.net and look in the manuals drop down. It may take a little digging to find your manual, but it should be there. I just installed a Command Start 2000 that someone brought to me this weekend, and it was the same unit as the Astra 1000RS listed on that site, no difference at all.

Back to Top

roadworks

Member - Posts: 31

Joined: June 29, 2006

Location: Ontario, Canada

Posted: December 22, 2006 at 12:19 AM / IP Logged

Twelvoltz wrote:

Command Start is the same as the Scytek, go to Scytek.net and look in the manuals drop down. It may take a little digging to find your manual, but it should be there. I just installed a Command Start 2000 that someone brought to me this weekend, and it was the same unit as the Astra 1000RS listed on that site, no difference at all.

No it is not the same.. The 290 model that he is refering to is the Original Command Start that was made in Winnipeg Manitoba.. I used to sell these and purchased them from a distributor in Toronto call Links Electronics.. Now are you sure that it is a 290i? The manual I have for the 290 has 12 programming steps...I have also the manuals for the 250/260, 270 & the 275i...

Back to Top

alexlloyd

Member - Posts: 24

Joined: April 06, 2006

Location: Canada

Posted: December 22, 2006 at 3:14 PM / IP Logged

The brain is labelled 290i and all the manuals I have show 12 steps but the car only accepts 11.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

command start 11 step programming

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.