2003 chevy fullsize

 Does anyone have an alram/ remote start wiring diagram for a 2003 chevy fullsize?  The wiring is different than the 200, and there is not an updated version yet from techsoft. Any help would be apreciated.

|       ITEM      |     WIRE COLOR     |POL|       WIRE LOCATION        |

|              12V|red (x2)            |+  |ignition harness            ||          STARTER|yellow              |+  |ignition harness            ||         IGNITION|pink (12 awg)       |+  |ignition harness            ||  SECOND IGNITION|white               |+  |ignition harness            ||   THIRD IGNITION|pink (18 awg)       |+  |ignition harness            ||        ACCESSORY|orange              |+  |ignition harness            || SECOND ACCESSORY|brown               |+  |ignition harness            ||       POWER LOCK|see directfax       |   |                            ||     POWER UNLOCK|document #1601 *2   |   |                            ||       LOCK MOTOR|gray                |   |driver door module in door  ||     UNLOCK MOTOR|tan                 |   |driver door module in door  ||    DISARM DEFEAT|tan                 |   |pass. door module in door   || PARKING LIGHTS +|                    |   |                            || PARKING LIGHTS -|gray/black          |   |brown plug @ BCM *1         ||       HEADLIGHTS|                    |   |                            ||     DOOR TRIGGER|gry/blk(L),blk/wht(R|-  |each door module in door *3 || DOME SUPERVISION|use door trigger    |   |                            ||  TRUNK/HATCH PIN|                    |   |                            ||         HOOD PIN|                    |   |                            ||TRNK/HTCH RELEASE|                    |   |                            ||  FCTRY ALARM ARM|arms with lock      |   |                            ||FCTRY ALRM DISARM|lt. green           |-  |driver door module in door  ||       TACHOMETER|NOT pnk, blk, or brn|   |any ignition coil           ||      SPEED SENSE|                    |   |                            ||       BRAKE WIRE|white               |+  |brake pedal switch          ||     HORN TRIGGER|black               |-  |steering column             ||           WIPERS|pink                |-  |steering column             ||  LF WINDOW UP/DN|blue - brown        |A  |driver window motor         ||  RF WINDOW UP/DN|blue - brown        |A  |passenger window motor      |

Notes:

NOTE: This vehicle has the passlock II immobilizer system that, when adding a remote start, must be interfaced with. Use PLDATA to bypass this. The passlock II wire colors are yellow, black, and RED / white (not used).  *1 The BCM (Body Control Module) is under the driver side dash.  *2 On base model trucks the lock wire is lt. blue (-) and unlock wire is white (-). They are in the lt. blue plug at the BCM.  *3 On base model trucks the door trigger wires are in the lt. blue plug at the BCM. On 4dr trucks the LR door trigger is lt. blue/black, and the RR is lt. GREEN/ black. They are in the purple plug at the BCM. Use all wires and diode isolate.

One thing that is wrong with that is the horn wire.  It is BLACK / YELLOW not black.