the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

three subs, two amps, two caps


Post ReplyPost New Topic
< Prev Topic Next Topic >
koolauto 
Member - Posts: 20
Member spacespace
Joined: September 22, 2006
Location: United States
Posted: December 30, 2006 at 12:12 AM / IP Logged  
I built this box for a customer , holds  three 12 inch subs for his bronco,now wants me to install all of the above, ran wire from battery now what??installed lift kit that was easy.
stevdart 
Platinum - Posts: 5,816
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: January 24, 2004
Location: Pennsylvania, United States
Posted: December 30, 2006 at 12:32 AM / IP Logged  
Are you kidding us?  Are you in the business?   What do you want to know?  What gear is involved?  Answers, answers!
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.
koolauto 
Member - Posts: 20
Member spacespace
Joined: September 22, 2006
Location: United States
Posted: December 30, 2006 at 12:34 AM / IP Logged  
sorry i can weld anything or take it apart,wiring its new, but im willing to learn,were do we go?
stevdart 
Platinum - Posts: 5,816
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: January 24, 2004
Location: Pennsylvania, United States
Posted: December 30, 2006 at 12:57 AM / IP Logged  
Since this is for a customer, here is a start.
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.
koolauto 
Member - Posts: 20
Member spacespace
Joined: September 22, 2006
Location: United States
Posted: December 30, 2006 at 1:15 AM / IP Logged  
must be me ,cant seem to see  it.ill pick up extra fuses
wretchedunloved 
Member - Posts: 29
Member spacespace
Joined: December 19, 2006
Location: United States
Posted: December 30, 2006 at 2:41 AM / IP Logged  
*Blinks, then rereads the post.  Blinks again.*  No, I don't think you should weld your lift kit to your subs, it could cause your flux capacitor to implode.  Best of luck to you.
2001 Monte Carlo SS
Sony XM-2002GTR
Sony XS-L123P5 x 2
jonathancullen 
Silver - Posts: 282
Silver spacespace
Joined: September 22, 2006
Location: United States
Posted: December 30, 2006 at 10:36 AM / IP Logged  
hmmm, so you dont know anything about audio? how did you build the box? closed or common chamber? how many cu.ft.? ported or sealed? are you asking us what subwoofers you should put in that box with your question? be more specific..........
two 12" cadence TXW-12S, cadence TXA-3002 amplifier, 1990 toyota celica system 10 speakers
DYohn 
Moderator - Posts: 10,740
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: April 22, 2003
Location: Arizona, United States
Posted: December 30, 2006 at 10:57 AM / IP Logged  
Stop now.   Click HERE and find an installer in your area. Get help.
Support the12volt.com
koolauto 
Member - Posts: 20
Member spacespace
Joined: September 22, 2006
Location: United States
Posted: December 30, 2006 at 1:24 PM / IP Logged  
thanks, im a welder by trade. put together a sealed box box for a customer ,his size.now i would like to know how to wire it up.three twelve inch subs two  2 channel amps and two caps.what other info do you need to know .if you came to my shop id gladly shake you hand and ask what you working on.but some of these replys- --           I take pride in my work and dont mind sharing, hope someone out here feels the same...thanks mike
DYohn 
Moderator - Posts: 10,740
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: April 22, 2003
Location: Arizona, United States
Posted: December 30, 2006 at 2:22 PM / IP Logged  
Are the subs SVC or DVC?  What are the amps?  You won't need the caps.
Support the12volt.com

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, June 29, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer