three subs, two amps, two caps

I built this box for a customer , holds  three 12 inch subs for his bronco,now wants me to install all of the above, ran wire from battery now what??installed lift kit that was easy.

Are you kidding us?  Are you in the business?   What do you want to know?  What gear is involved?  Answers, answers!Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

sorry i can weld anything or take it apart,wiring its new, but im willing to learn,were do we go?

Since this is for a customer, here is a start.Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

must be me ,cant seem to see  it.ill pick up extra fuses

*Blinks, then rereads the post.  Blinks again.*  No, I don't think you should weld your lift kit to your subs, it could cause your flux capacitor to implode.  Best of luck to you.2001 Monte Carlo SS

Sony XM-2002GTR

Sony XS-L123P5 x 2

hmmm, so you dont know anything about audio? how did you build the box? closed or common chamber? how many cu.ft.? ported or sealed? are you asking us what subwoofers you should put in that box with your question? be more specific..........two 12" cadence TXW-12S, cadence TXA-3002 amplifier, 1990 toyota celica system 10 speakers

Stop now.   Click HERE and find an installer in your area. Get help.Support the12volt.com

thanks, im a welder by trade. put together a sealed box box for a customer ,his size.now i would like to know how to wire it up.three twelve inch subs two  2 channel amps and two caps.what other info do you need to know .if you came to my shop id gladly shake you hand and ask what you working on.but some of these replys- --           I take pride in my work and dont mind sharing, hope someone out here feels the same...thanks mike

Are the subs SVC or DVC?  What are the amps?  You won't need the caps.Support the12volt.com