Factory Security Tone

Home / the12volt's Install Bay / Car Security and Convenience / Factory Security Tone (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

drew215

Member - Posts: 22

Joined: January 07, 2004

Location: United States

Posted: January 01, 2007 at 11:10 PM / IP Logged

Hi there, I want to know how I can integrate a viper alarm system into a 2007 subaru impreza.

I want to achieve the factory tone from the viper system, the tone that the lexus also have through the factory remote.

I want to arm and disarm usinga factory tone instead of the viper siren. Is there a factory siren I can hook up the output from the viper?

Is this possible to achieve?

thanks in advance

Back to Top

topper

Copper - Posts: 56

Joined: June 29, 2005

Posted: January 02, 2007 at 11:08 PM / IP Logged

sure, as long as the factory siren is a 12volt siren. be careful the siren is not actually a speaker as opposed to a 12v siren

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Factory Security Tone

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.