2006 Taurus, aftermarket keyless entry

Home / the12volt's Install Bay / Car Security and Convenience / 2006 Taurus, aftermarket keyless entry (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

scoobyxj

Member - Posts: 9

Joined: December 23, 2006

Location: United States

Posted: January 02, 2007 at 12:19 AM / IP Logged

I'm trying to find out some info for a friend on a 2006 Ford Taurus that did not come with key less entry from the factory. The problem is that the after market key less will work fine for a few days then slowly quit working, and starts setting off the factory antitheft, however the trunk pop feature will continue to work fine. It has had two Vipers, and an off brand system installed trying to correct the problem, but it still persists. Any idea as to what is going on? I don't understand why it surfaces after a few days from installation, and not immediately. It has the installation guys stumped at the place she had the work done. They have even contacted another shop, and the Ford garage to no avail. Everyone seem to be scratching there heads.

Back to Top

au5599

Copper - Posts: 94

Joined: December 22, 2005

Location: United States

Posted: January 02, 2007 at 8:23 AM / IP Logged

what wires are they tied into and where?

Street Dreams Car Club

93 GRAND CARAVAN SE / Astro

Team New York SS3-4 06 & SM3-4 07 DB Drag World Finals

2003 Chevy Suburban LT / 98 GTP

Back to Top

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: January 02, 2007 at 8:38 AM / IP Logged

Yes...tell us "what" is connected to "what"

Back to Top

KarTuneMan

Platinum - Posts: 7,056

Joined: December 14, 2004

Location: Isle Of Man

Posted: January 02, 2007 at 8:45 AM / IP Logged

At the GEM, pass side under dash, find the factory disarm pink/white NEG(-) and the unlock pink/green, also NEG(-) trigger both at the same time. Diode isolate. The cathode towards the GEM. Then for lock and arm...in the same connector find a red, and a yellow. (2 wires) rtrigger these together with your lock output, diode isolate as well. You shouldn't need relays.

PS the trunk release is there as well, purple / YELLOW NEG(-)

Back to Top

NowYaKnow

Gold - Posts: 1,217

Joined: December 18, 2002

Posted: January 02, 2007 at 1:14 PM / IP Logged

If it's setting off the factory alarm, then it most likely did come with OEM keyless but the remotes must be missing. It only happens after a few days because they are randomly using the switch on the door to lock the doors. If it truly is setting off the alarm, diode isolate and hit the pink/white and pink/green as mentioned above. If no alarm is sounding, but the doors won't unlock, hit the yellow/black and pink/green at the same time. You will also need to set for double pulse or they will have to hit the button twice.

Mike

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2006 Taurus, aftermarket keyless entry

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.