03 impala, valet remote start

Home / the12volt's Install Bay / Car Security and Convenience / 03 impala, valet remote start (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

hieghts

Member - Posts: 22

Joined: December 15, 2003

Location: United States

Posted: January 09, 2007 at 9:10 PM / IP Logged

Well we had the car scanned and came up with 2 codes. One was low input from temp sending unit and the other was low input from maf or vaf sensor. We cleaned the maf and seems to be running good and no light so far.

Back to Top

hieghts

Member - Posts: 22

Joined: December 15, 2003

Location: United States

Posted: January 10, 2007 at 10:13 PM / IP Logged

hieghts wrote:

I recently put a valet r/s on the car and when I was testing it when I got it done the radio would lock itself then the next time unlock. It quit doing it for awhile now it is doing it all of the time. I connected all of the ignition and accessory wires in the ignition harness so I don't understand it. From what I understand these radios read the vin from the car and never should lock as long as they are in the correct vehicle. There is no code to unlock or anything. Any suggestions?

Anyone????

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

03 impala, valet remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.