1995 mazda B2300

Home / the12volt's Install Bay / Car Audio / 1995 mazda B2300 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

luvmydream

Member - Posts: 1

Joined: January 14, 2007

Posted: January 14, 2007 at 8:18 PM / IP Logged

Need help installing a new stereo, has power but speakers aren't working.

Back to Top

jimmy303

Member - Posts: 19

Joined: December 27, 2005

Location: United States

Posted: January 15, 2007 at 10:20 AM / IP Logged

Elaborate. Are you sure your speakers are good?

time is bending.....

Back to Top

osanboy

Member - Posts: 2

Joined: June 21, 2006

Location: Japan

Posted: January 15, 2007 at 10:56 PM / IP Logged

make sure u installed it correctly. connect the positive wire from each speaker to the positive connector on the back of the stereo first. then connect the negative wire from each speaker to the negative connector on the back of the stereo. if theres a wire coming from the speakers, the speakers are grounded at the chassis. if this happens you'll have to install a new speaker wiring. then conncet the ground wire of the stereo to a screw or bolt near where the radio is placed. hope that helps.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1995 mazda B2300

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.