1988-89 Buick Lesabre Security info?

Home / the12volt's Install Bay / Car Security and Convenience / 1988-89 Buick Lesabre Security info? (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

didimakeyascrea

Member - Posts: 12

Joined: January 19, 2007

Location: United States

Posted: January 19, 2007 at 11:56 PM / IP Logged

this will be my second install, but this time i wanna know a lil more before i go spend 20 hours doin it again... on the information i was givin on this site, could someone explain to me what this is actually tellin me, are these the wire colors in the car or the wires with the alarm kit?

1988-89 Buick Lesabre Security Information
Constant 12V+	Red	Ignition Switch Harness
Starter	Yellow	Ignition Switch Harness
Ignition	Pink	Ignition Switch Harness
Accessory	Orange	Ignition Switch Harness
Tach	PURPLE / White	Multi Coil Pack
Brake Switch	White	Brake Switch
Trunk Pin	n/a	Works with Dome Light
Parking Lights	Brown	Light Switch
Head Lamp	Yellow	Light Switch
Hood Pin	n/a
Factory Disarm	n/a
Door Trigger	White (-)	Light under Dash
Door Lock	Light Blue	Driver's Kick Panel at Door Harness
Door Unlock	White	Positive Trigger
Horn Wire	Black (-)	Steering Column

also, would i need any diods, resistors, etc.. on an install like this, an alarm with keyless entry?

yeaaaaaaaaaaaa!!!

Search for other posts by didimakeyascrea

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: January 20, 2007 at 8:21 AM / IP Logged

these are the only wires needed:

Constant 12V+

Starter

Ignition

Trunk Pin(optional)

Parking Lights

Door Trigger

Door Lock

Door Unlock

couple diodes might need if trunk input wire do not exist on your alarm unit.

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

didimakeyascrea

Member - Posts: 12

Joined: January 19, 2007

Location: United States

Posted: January 20, 2007 at 1:48 PM / IP Logged

that narrows the wire use down alot... now the list i posted, is that the car wire colors in the middle, than on the far right column that just is tellin me what the wire is, right? than the first colum is the alarm wire that goes to the second column? 1988-89 Buick Lesabre Security info? -- posted image.

1988-89 Buick Lesabre Security info? -- posted image.

is that right?

yeaaaaaaaaaaaa!!!

the12volt

Administrator - Posts: 3,955

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 07, 2002

Location: Louisiana, United States

Posted: January 20, 2007 at 1:55 PM / IP Logged

Columns are as follows: Function | | Wire Color (Polarity) | | Location and/or Type

the12volt • Support the12volt.com

didimakeyascrea

Member - Posts: 12

Joined: January 19, 2007

Location: United States

Posted: January 20, 2007 at 2:46 PM / IP Logged

ok the wire color, is that the wires in the car, or on the alarm system, thats pretty much the only thing i dont got...

yeaaaaaaaaaaaa!!!

didimakeyascrea

Member - Posts: 12

Joined: January 19, 2007

Location: United States

Posted: January 20, 2007 at 3:06 PM / IP Logged

ok, nm... thats the vehicle wire colors... what color wire is usually the door trigger wire on an alarm system, mine isnt labeled, just the + and - door trigger wires are.. i dont see a door trigger wire color..

yeaaaaaaaaaaaa!!!

didimakeyascrea

Member - Posts: 12

Joined: January 19, 2007

Location: United States

Posted: January 20, 2007 at 11:01 PM / IP Logged

also on the alarm i have the k9 classic, it has an extra plug in which contains 2 wires, one blue, one green, and the label for the wires are door lock output, what would these be used for, need them or not... i didnt use them last time and last time i could never figure out how to wire it to lock and unlock the doors, is this the wire id need or no..

yeaaaaaaaaaaaa!!!

didimakeyascrea

Member - Posts: 12

Joined: January 19, 2007

Location: United States

Posted: January 20, 2007 at 11:36 PM / IP Logged

anyone know... and the door trigger, would i have to run a wire to each trigger or is there a main that is labeld as the white?

yeaaaaaaaaaaaa!!!

didimakeyascrea

Member - Posts: 12

Joined: January 19, 2007

Location: United States

Posted: January 21, 2007 at 12:32 PM / IP Logged

anyone?

yeaaaaaaaaaaaa!!!

didimakeyascrea

Member - Posts: 12

Joined: January 19, 2007

Location: United States

Posted: January 21, 2007 at 11:13 PM / IP Logged

guess not..

yeaaaaaaaaaaaa!!!

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.