the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

94 Civic, door trigger problem


Post ReplyPost New Topic
< Prev Topic Next Topic >
iceman7329 
Member - Posts: 23
Member spacespace
Joined: January 02, 2007
Location: United States
Posted: January 20, 2007 at 11:05 PM / IP Logged  

I noticed the other day when I unlocked my passnger side door with the key and opened it with the alarm armed the alarm didnt go off. So I tried my other doors, same thing. I only works on the drivers side door. So, whats the problem? I dont have the dome light supervision wire hooked up yet, could that be the problem? If so, how would I go about connectng the dome ligh wire to my door trigger wire? I was told that was he easiest way but that I had to use a relay. Explain please. :)

KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: January 20, 2007 at 11:19 PM / IP Logged  

tell us what your connected to....so we don't try and offer a solution on a wireing configuration your already using? Here goes anyways.....

You can also find this wire in the "A" pillar.....it's the dome light wire. it will detect all the doors. You might want to pull your door pins and check the condition of the pin itself....they are known for rust and getting "sticky"

DOORPIN Lt.GREEN/ red In driver's kickpanel   - 

iceman7329 
Member - Posts: 23
Member spacespace
Joined: January 02, 2007
Location: United States
Posted: January 20, 2007 at 11:45 PM / IP Logged  
Ive got the door pin wire connected, come to think of it, right off the drivers side swtich. So that explains that one. So just connect my dome light wire to the dome light wire inside the a pillar going to the dome light? All the door pins work fine.
KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: January 21, 2007 at 10:52 AM / IP Logged  
yup, that should handle dome light supervision, and door trigger. You might want to isolate the two.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, May 4, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer