windows roll up

I have a Ford Focus 2001 ZTS, and I want to know if is possible to add a smart windows to my keyless remote entry ?? I don't want to add a new alarm, I only wants the windows roll-up when lock the car.

Thanks in advance !!

first of all, wire up your window module.......to activate the module you need a ground signal.

than you'll need 3 relays and a pulse timer. label the relays A, B, and C.

there is a wire that turns into (+) every time you lock the doors with the doorlock swich, find it(driver's side kick panel) when i mention "door lock wire i'll be refering to this wire". remember that it's the one that turns to (+)

relay "A":

  A87: door lock wire

 A86: door lock wire

 A85: ignition (green and yellow wire at ignition swich)

 A30: to pulse timer trigger

pulse timer: the pulse timer has to be set to sense (+) current to be triggered(read the pulse timer instructions, set it to work for about 40 seconds) pulse timer works olmost like a relay.

 trigger wire: conected to A30

 87:(+)fused constant

 30:conect to B86

 relay "B"

 B86:to pulse timer's 30

 B87: constant ground(-)

 B30:to B85 aswell as your window module trigger wire

 relay "C":

 C86:doorlock wire

 C87: constant groud(-)

 C85:to C87 (constant ground)

 C30:to B85

and thats it......

remember to read the instructions on the pulse timer and follow its instrutions as well.

this will allow you to roll up your windows lockin the door twice with your keyless entry.  this will only work when the car and ignition is off.

hope this helps....remember to use fuses for your constant(+)currents.

Great, thank Ossrom, just one more question....Do you have a part number for pulse timer ?? Or how can I do it ??

Thanks again

go to any "DEI" authorized dealer and they will know what you are talking about.. I don't rememer the part number, but like i said, any store that sales DEI parts will know what it is, it shuld cost you about 15 to 20 dollars.

sorry.