06 silverado remote starter

Home / the12volt's Install Bay / Car Security and Convenience / 06 silverado remote starter (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

crillera

Member - Posts: 2

Joined: February 05, 2007

Location: United States

Posted: February 05, 2007 at 11:07 PM / IP Logged

i'd just installed a Ungo remote starter on a 06 crew cab slvrd and I know that the second ign has to be connected but does it have to have power all the time or just when the alarm provides it I will apreciate any feedback

another-kelly

Silver - Posts: 618

Joined: July 11, 2004

Location: United States

Posted: February 05, 2007 at 11:50 PM / IP Logged

um, just when remote started

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: February 06, 2007 at 8:08 AM / IP Logged

Ya...could you describe in a bit more detail, what the problem is....?

crillera

Member - Posts: 2

Joined: February 05, 2007

Location: United States

Posted: February 06, 2007 at 12:17 PM / IP Logged

yeah the trani wasnt working right and the check engine light was turning on so I connected the 2nd ign to the white wire but I was wondering if it had to have power on all the time or just when the alarm provides it.

another-kelly

Silver - Posts: 618

Joined: July 11, 2004

Location: United States

Posted: February 06, 2007 at 12:34 PM / IP Logged

if the engine is gonna be running, then the white 2nd ignition wire needs to be powered up. so if it's remote started, then the 2nd ignition from the remote start needs to be connected to the white 2nd ignition in the vehicle.

hope you didn't damage the tranny

paul h

Copper - Posts: 109

Joined: December 06, 2006

Location: Texas, United States

Posted: February 11, 2007 at 9:34 PM / IP Logged

crillera wrote:

This is directly from my install sheets on those trucks...and I make it a point, that if the unit you are hooking up has a output for Ign 2 and the vehicle has a Ign2 wire, I connect it!! Its there for a reason.....

< face=Arial >

Note: Ign.2 Wire; This wire MUST be energized when installing a remote start system otherwise a CHECK ENGINE light will turn on and the transmission will not shift properly and the transmission may be damaged.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

06 silverado remote starter

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.