the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

ford five hundred factory disarm

Home / the12volt's Install Bay / Car Security and Convenience / ford five hundred factory disarm (Topic Closed Topic Closed)
Welcome Guest :)

Post ReplyPost New Topic
< Prev Topic Next Topic >
racerrx-3 
Member - Posts: 12
Member spacespace
Joined: January 15, 2007
Location: United States
Posted: February 10, 2007 at 12:46 PM / IP Logged  

OK,

Ford Five Hundred and cant locate factory disarm wire.....   Supposed to be Con C - PIN 4 at SJB, there is no lt blue/black.  No such wire found in Dr. door kick.  Checking all the wires for - pulse on disarm and coming up with nothing.....

Thanx in advance for help!

Charlie

Alternative Auto

mikvot 
Gold - Posts: 1,043
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 19, 2006
Location: Missouri, United States
Posted: February 10, 2007 at 1:24 PM / IP Logged  
are you sure it has an alarm.....i do 500's every day and never had a prob finding the factory disarm. I usually get it at the very bottom of the junction box.....there are two connectors, it will be in the left connector.
Mike M2 
Platinum - Posts: 2,652
Platinum spacespace
Joined: June 29, 2005
Location: United States
Posted: February 10, 2007 at 1:34 PM / IP Logged  
I just did one too and it was right in the drivers door harness in the kick panel....
Mike M2
Tech Manager
CS Dealer Services
mikvot 
Gold - Posts: 1,043
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 19, 2006
Location: Missouri, United States
Posted: February 10, 2007 at 1:52 PM / IP Logged  
yep, you can also get it there.....thats how i used to do them, before i found everything at the junction box.
racerrx-3 
Member - Posts: 12
Member spacespace
Joined: January 15, 2007
Location: United States
Posted: February 10, 2007 at 2:22 PM / IP Logged  

OK?

Thanx, found the wire.  Although how did you guys check the wire.  Nothing reads on multi?  I used test light to transfer pulse (-) just in case, that worked but not ideal.....

Thanx,

Charlie

Alternative Auto

mikvot 
Gold - Posts: 1,043
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 19, 2006
Location: Missouri, United States
Posted: February 10, 2007 at 2:27 PM / IP Logged  
to test, put the key in the door cylinder.....when you unlock with the key it will give you a neg. pulse.
racerrx-3 
Member - Posts: 12
Member spacespace
Joined: January 15, 2007
Location: United States
Posted: February 10, 2007 at 3:39 PM / IP Logged  

AAAHHHHH...

Knew I was missing something.....  I lost a couple of dollars in time, but it's Saturday and were closing.  Thanx again........


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, May 4, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer