95 chevy pu door lock wire location

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 95 chevy pu door lock wire location (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

blackmas

Member - Posts: 7

Joined: January 22, 2003

Location: United States

Posted: February 03, 2003 at 10:24 PM / IP Logged

Going by the chart the lock and unlock wires are in the drivers kick panel, i have looked but didnt find nothing there but speaker wires???are they above the kick panel in the dash???

If you could help me out with the exzact location of wires. thanks..

seth

Player69

Silver - Posts: 504

Joined: October 27, 2002

Posted: February 03, 2003 at 11:06 PM / IP Logged

If it has factory keyless entry you can get them at the relay just above and towards the rear of the truck of the gas pedal.

If no factory keyless then they are reversing polarity in the driver kick panel. Remove the kick panel cover reach in the hole and pull down the wires.

blackmas

Member - Posts: 7

Joined: January 22, 2003

Location: United States

Posted: February 03, 2003 at 11:17 PM / IP Logged

thank you

seth

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

95 chevy pu door lock wire location

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.