remote start 2000 nissan maxima

Home / the12volt's Install Bay / Car Security and Convenience / remote start 2000 nissan maxima (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

rnemtb

Copper - Posts: 70

Joined: September 23, 2005

Location: New Jersey, United States

Posted: February 17, 2007 at 2:04 PM / IP Logged

installed 561t r/s in 2000 maxima. r/s will start with double pulse from d/s lock button but not with factory remote. also led not on. blu/wh wire attached to gray wire at control module to the right of steering colum.

thanks

george

rnemtb

Back to Top

rnemtb

Copper - Posts: 70

Joined: September 23, 2005

Location: New Jersey, United States

Posted: February 17, 2007 at 5:32 PM / IP Logged

it also will crank but not start or learn the tach.tach wire is WHITE/ green at cotrol module behind center console pass side.

thanks

george

rnemtb

Back to Top

prdjr165

Copper - Posts: 293

Joined: October 31, 2002

Location: Illinois, United States

Posted: February 17, 2007 at 6:35 PM / IP Logged

Did you use an ignition bypass module to bypass the chip in the KEY?will the car start with the key?

Back to Top

rnemtb

Copper - Posts: 70

Joined: September 23, 2005

Location: New Jersey, United States

Posted: February 18, 2007 at 7:10 AM / IP Logged

used 556u bypass,key in 556u starts car,used another key that starts car,put in run position,and will not crank or start with key in run position.will crank with key in ignition.

rnemtb

Back to Top

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: February 18, 2007 at 5:39 PM / IP Logged

12 VOLTS

Green

Ignition switch harness

+

IGNITION

BLACK/ lt.red

Ignition switch harness

+

ACCESSORY

WHITE/ blue or Red

Ignition switch harness

+

STARTER

BLACK/ dk.red

Ignition switch harness

+

STARTER 2

BLACK/ blue

Ignition switch harness

+

This is a cold start wire and must be connected for remote start.

Ya got BOTH starter wires connected?

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

remote start 2000 nissan maxima

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.