the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

where can i find mdf?


Post ReplyPost New Topic
< Prev Topic Next Topic >
krazykustoms 
Member - Posts: 32
Member spacespace
Joined: February 21, 2007
Location: United States
Posted: February 21, 2007 at 6:29 PM / IP Logged  
Where can I find MDF? I have looked everywhere around here. Lowes, Home Depot, and even all the local lumber yards. Where can I get it?
swerve 
Copper - Posts: 149
Copper spacespace
Joined: January 10, 2007
Location: Oregon, United States
Posted: February 21, 2007 at 7:10 PM / IP Logged  
lowes and home depot carry it, you can find it in lumber near the other plywood. did you ask someone where it was?
git yer swerve on!
krazykustoms 
Member - Posts: 32
Member spacespace
Joined: February 21, 2007
Location: United States
Posted: February 22, 2007 at 2:58 AM / IP Logged  
I've checked with Lowes and Home Depot, plus I have checked with all the lumber yards around my area. Nobody carries it. They say that they can special order it, but that means more money.
gms81 
Member - Posts: 47
Member spacespace
Joined: February 17, 2007
Location: United States
Posted: February 22, 2007 at 11:55 PM / IP Logged  
I am in home depot and/or lowes at least 2-3 times a week and pass it up just about everytime. Where are you located??
krazykustoms 
Member - Posts: 32
Member spacespace
Joined: February 21, 2007
Location: United States
Posted: February 23, 2007 at 2:39 AM / IP Logged  
I'M in a small hick town called Waynesville N.C. Our Home Depot is in Asheville. I know that they will special order it for me, but they said it will cost more. It's already high enough.
auex 
Platinum - Posts: 5,041
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 23, 2002
Location: Arizona, United States
Posted: February 23, 2007 at 3:05 AM / IP Logged  
Home depot should definately be carrying it. Guess you are gonna have to order it.
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
racerx22 
Copper - Posts: 57
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: May 24, 2005
Location: United States
Posted: February 23, 2007 at 1:05 PM / IP Logged  
yea its like 6.88 sence for 3/4" 2x4ft mdf here in fla....

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, October 18, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer