the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

6x9 premade rings


Post ReplyPost New Topic
< Prev Topic Next Topic >
maglin 
Copper - Posts: 206
Copper spacespace
Joined: June 30, 2004
Location: United States
Posted: February 24, 2007 at 8:36 PM / IP Logged  
i need a few rings for my 6 x 9s, and am slightly intimidated by trying to make them. aside from making a jig that i'm not even sure how to make, i can't imagine a good way to make them.
thoughts? i'd like to think about just buying them flat out and then putting them into my project.
realitycheck 
Silver - Posts: 751
Silver spacespace
Joined: September 09, 2004
Posted: February 26, 2007 at 10:46 AM / IP Logged  
Just cut them out of mdf with a jig saw.
Learning the trade one fiberglass creation at a time!
maglin 
Copper - Posts: 206
Copper spacespace
Joined: June 30, 2004
Location: United States
Posted: February 26, 2007 at 1:23 PM / IP Logged  
what do i use to lay the pattern of the cut on the board?
realitycheck 
Silver - Posts: 751
Silver spacespace
Joined: September 09, 2004
Posted: February 26, 2007 at 2:04 PM / IP Logged  
Did they not come with a template in the box?     If not you can just start by cutting it out of posterboard. The stuff you used in school to put your projects on.   Cut it out with scissors and keep putting it onto the speaker and checking your cuts until you get the hole good and snug on mounting portion of the speaker. Once you get that you can just trace your hole onto the mdf.
Learning the trade one fiberglass creation at a time!
maglin 
Copper - Posts: 206
Copper spacespace
Joined: June 30, 2004
Location: United States
Posted: February 26, 2007 at 7:52 PM / IP Logged  
ok. just wondering if there was a regular pattern i could get my hands on, and nope, these speakers didn't
do most 6 x 9s fit in the same hole? heh.
realitycheck 
Silver - Posts: 751
Silver spacespace
Joined: September 09, 2004
Posted: March 01, 2007 at 1:49 PM / IP Logged  
Actually I read while searching for you that they actually can be shaped different. So not all 6x9's are the same unfortunately.
Learning the trade one fiberglass creation at a time!

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, October 3, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer